Bibby Scientific's Electric Bunsen combines the advantages
of a regular gas burner with the clean, easy operation of
our Electromantles. Radiation from the heater is directed
upwards to a focal point. The Electric Bunsen is ideal for
heating test tubes, crucibles, small flasks and beakers,
regardless of their shape.
Features
 Conical shaped heating element directs radiant
heat to the top cavity
Top cowl deflects heat away from your hand
Air circulation from the vented housing keeps
the base cool enough to hold during operation
Burner consumes only 400W of power
Recommended controller is the MC5
Bibby Scientific's Electric Bunsen, combines the advantages
of a regular gas burner with the clean, easy operation of our
Electromantles. It is corrosion-resistant and has a cool-to-thetouch
base.
Radiation from the heater is directed upwards to a focal point.
The Electric Bunsen is ideal for heating test tubes, crucibles,
small flasks and beakers, regardless of their shape.
MC5 Electric Bunsen Controller
The MC5 Controller has been designed to provide a
comprehensive answer to control the heating of resistive loads
such as Electric Bunsens, Electromantles, Heating Tapes and
Cords for bench top operation delivering up to a maximum of
800 Watts. A rod support clamp is provided at the rear of the
controller to take a standard 12.5mm diameter rod. An accessory
extension mains lead is available where remote operation is
required e.g. in a fume extraction unit.
Data Sheet
Manual
|
Ordering Information
BA6101 - 230V 50/60Hz, 480W (Without Controller)
BA6101X1 - 115V 50/60Hz, 430W (Without Controller)
BA6101X2 - 100V 50/60Hz, 480W (Without Controller)
BA6101X3 - 90V 50/60Hz, 430W (Without Controller)
BA6101X6 - 230V 50/60Hz, 480W, EU Plug (Without Controller)
BA6101/C - 230V 50/60Hz, 480W (With Controller)
BA6101/CX1 - 115V 50/60Hz, 430W (With Controller)
BA6101/CX6 - 230V 50/60Hz, 480W EU Plug (With Controller)
MC5 - 230V, 50/60Hz, 800W
MC5X1 - 115V, 50/60Hz, 460W
MC5X6 - 230V, 50/60Hz, 800W, EU Plug
|
