|
Features
 Measures Lp, Leq, Lmax, LE, Pa2h, Lep'd, DOSE, Dose Per Hour, L10, L90, L(user)
Overload latched indicator
Measures simultaneously LAeq and either LZeq or
LCeq
User selectable Exchange rate, Threshold and
Criterion level.
User Modes: [email protected], Environmental or ALL
C or Z weighted Peak
Save results to internal flash memory
Download data to a PC via a USB connection
Noise Analysis Software included with the meter
Small and light weight, fits into small shirt or jacket
pocket and also supplied with a strong pocket clip.
Lockable Key pad through options
Constructed of tough crack resistance plastic.
Single battery operation of approximately 12 hours
The Castle SONUS range of pocket sized sound level meters
bring simplicity and power to the worlds of Noise at Work
and Environmental sound monitoring. From a basic sound
pressure meter to full data-logging, combined sound and dosemeter,
the range of systems covers a wide diversity of applications.
Top of the Castle Pocket Range of Sound Level Meters is the
SONUS L (GA116L & GA216L), a Noise at Work and Environmental
Sound Meter boasting a combined integrating sound level
meter and dosemeter with full data-logging capability. Simply
un-plug the sound meter microphone and plug-in the dosemeter
cable to convert to a full-function dosemeter. The
dual-measurement feature of the SONUS means two
versions of most parameters can be measured simultaneously.
This feature means you only ever need to
measure once to capture all the data you need!
Mobility of instrumentation is essential for effective
noise measurement. As the name indicates, the Castle
SONUS 'Pocket Meters' pack all the necessary features
into pocket sized proportions.
The data-logging instruments have a USB connection
and are compatible with the Castle dBdataPro software,
where data can be presented in the desired format and
copied and pasted into other applications, so you don't
have to change the way you have always completed your
reports.
There are a number of system packages available to suit
many applications from simple tasks such as alarm monitoring,
to a fully weatherproof system for long-term environmental
monitoring, there are also dedicated packages for Noise at
Work requirements.
Data Sheet
|
All measured values can be saved to the internal
flash memory of the GA116L or GA216L for
subsequent output. The results can be viewed on
the instruments own display or downloaded to the
included dBdataPro noise analysis PC software via
a high speed USB connection.
Using the instruments could not be simpler. The
simple user interface can easily be scrolled and
selected to immediately display the information you
need. The keypad also has a dedicated dB Range
key, simply press and then select your required
range.
The instruments also have 3 operating modes,
select one and the instrument sets itself to the
required settings. Its never been easier !!
The measured noise is computed and stored as a
series of pre-chosen time intervals. The GA116L
and GA216L instruments will store up to
approximately 2100 intervals in either one or
multiple recordings.
Each instrument is supplied with a comprehensive
printed user manual and a getting started sheet.
|
