Home › Gas Analysers › Safety › Drager X-am 3000
Drager X-am 3000
This product is now obsolete.
The X-am 3000 by Drager Safety is an innovative 2-4 gas warning instrument. Reliable monitoring of H2S, CO, O2 and combustible gases in ambient air can be achieved by this small lightweight instrument.
The instrument is ideally suited for gas monitoring for all applications and industries with a combination of a compact design with state of the art electronics.
Rugged and Durable
Protection against dust and water is standard
and ensures reliable operation in all
environments. The optional rubber-boot
gives additional protection for the Drager
X-am 3000 from bumps and hits.
Easy to use
A large display enables the easy identification
of the measured values. The simple 3-
button operation and an easy to use menu
ensure intuitive operation.
The visible menu makes selecting and performing
other functions quick and simple.
After switching on the Drager X-am 3000,
it performs a self-test.
The precalibrated electrochemical sensors,
and the catalytic sensor are automatically
recognized and provide precise and reliable
measuring results. All Drager sensors show
a fast and accurate response to changing
In addition to a very loud audible alarm
and a visual alarm, a vibrating alarm is integrated
in the instrument.
The functionality and the battery status are
monitored continuously and will, if necessary
generate an alarm. TWA and STEL
are also evaluated.
Different alarm cadences indicate pre and
main alarm conditions.
Optional Built-in Pump
An optional internal pump which can be
used together with 20 m / 66 ft. tubing is
ideal for confined space applications. A
convenient pump adaptor makes is easy to
switch between pump and diffusion mode.
Meet individual power requirements
NiMH and alkaline batteries are available
and can be interchanged. There are different
charging options, including a car charger,
to meet your specific requirements.
Useful software functions
A life signal assures full functionality of the
instrument without a visual check by the
Even if the peak value disappeared before
it could get registered, the Drager X-am
3000 can recall all maximum values.
When using a defined gas mixture, the
instrument can be calibrated by pressing
a single button.
Drager X-am 3000 can be fitted with a
datalogger which records gas concentrations
and alarms for 60 hours.
Drager X-am 3000 has worldwide
approvals: ATEX, UL, CSA and IECEx.
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page