Adhesive DC tape, Surface Primer, Expansion braid bonds and dressing toll, Glazing bar holdfast

\| \| Flat Tape System \| Solid Circular System \| Cable and Wire System \| Accessories \| \| How to apply lightning protection \| Lightning Design Considerations \|
Conductor fixings

Adhesive DC tape clip

For use on surfaces other than PVC roofing
For use with bare tape

Conductor Size	Colour	Weight each	Part No
20x3mm	Brown	0.03kg	CA015
25x3mm	Grey	0.03kg	CA020

For use with PVC covered tape

Conductor Size	Colour	Weight	Part No
25x3mm	Brown	0.03kg	CA025
25x3mm	Black	0.03kg	CA030
25x3mm	Grey	0.03kg	CA040
25x3mm	Stone	0.03kg	CA045
25x3mm	White	0.03kg	CA050

Adhesive DC tape clip

Surface primer

Accessories for adhesive clips

Description	Weight Each	Part No
Surface Primer. 250ml spray applicator (Sufficient for the application of approximately 500 clips).	0.24kg	CA900

Surface primer
Note: Furse strongly recommend the use of the primer when installing the Furse adhesive clip.

Expansion braid bonds and dressing tool

Special flexible expansion braid bonds

Type	Material	Length	Cross Sectional Area	Weight Each	Part No
Single Length	Aluminium	200mm	50mm²	0.07kg	BN001
Single Length	Copper	200mm	50mm²	0.17kg	BN101
Cross Over	Aluminium	300mm	50mm²	0.23kg	BN002
Cross Over	Copper	300mm	50mm²	0.53kg	BN102

Dressing tool

Description	Weight Each	Part No
Aluminium Tool for dressing conductor	0.31kg	DT100

Expansion braid bonds and dressing tool

Glazing bar holdfast

Conductor Material	Weight Each	Weight Each	Part No
Copper	12mm	0.11kg	HF705
Aluminium	12mm	0.05kg	HF710

Block supplied complete with fixing screw. Enables DC clips etc, to be secured to steel frames, girders, window frames, etc. Conductor clip sold separately.

Glazing bar holdfast

Flat Tape System