HomeProcessingLevel Measurement › Hawker Electronics - LS1 Magicap Point Level Probe

Hawker Electronics - LS1 Magicap Point Level Probe

Stand Alone Level Control for NON-conducting Liquids and Powders

  Suitable for low bulk density and aerated materials
  Ignores coating and build-up
  Detects level through non-metallic container walls
  Oil/Water interface detection versions available
  Ideal for difficult applications
  Self contained, low cost and simple to install

The L.S. Magicap level switch comprises of a sealed insulated probe containing the sensing circuitry attached to an polypropylene terminating head.

The terminating head houses the switching relay, LED indicator, sensitivity potentiometer and terminals.

Powered from a nominal 24VDC supply (15 to 30VDC), or 12VAC the L.S.

Magicap provides a S. P. C. O. voltage free contact rated at 240VAC resistive.

Proven high sensitivity Magicap detection circuitry can be easily adjusted on site to provide optimum performance under difficult conditions.



Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.

Back To Last Page

Conductivity Level Probes and Controllers

P4 Plug in Level Controller for Panel Mounting
DC1P Conductivity Level Control
P7 IS ATEX Approved Controller
AC1 Level Control

Electrode Holders

E14 Light Duty Multi-Electrode Holder
E13A Multi-Electrode Holder
HPE8 Heavy Duty
HPE7 Light Duty
E4 and E5 Borehole Electrodes

Point Capacitance

LS1 Magicap Point Level Probe




990 Signal Processor
Flexilevel 2

Want A Quotation?

Please fill out the following fields and we will e-mail you a quotation shortly.