This product is now obsolete and has been replaced by the Kane 455 Boiler Analyser.
Stress levels of Heating Engineers must be at a record high due to the complexity of modern high
efficiency boilers and the increasing level of regulation and paperwork. Designed to be 'the most user
friendly 5 in 1 analyser available', the new KANE 425 combustion analyser is the perfect remedy.
A simple rotary switch enables the engineer to quickly view readings including CO/CO2 ratio, combustion,
efficiency, differential pressure and differential temperature or to perform a tightness test or a room CO
build-up test. On screen prompts guide the user where necessary. A plug-in gas leak detector option is
Live or stored test reports can be printed using an infra-red printer or sent to a laptop or PDA via the
The outstanding feature of the Kane 425 is the high accuracy and stability of its pressure readings.
Difficult tasks such as measuring flue draught or setting the differential pressure of air/fuel ratio valves can
be performed with confidence.
Battery life is typically 12 hours when fitted with either alkaline or rechargeable NiMH batteries. A mains
charger and a 12v in-vehicle charger are available.
Four line backlit display controlled by rotary switch
Protective rubber sleeve with integral magnet for 'hands free' use
O2, CO, CO2, CO/CO2 ratio, temperature and efficiency readings
Multi-fuel (natural gas, propane, butane, LPG, 28/35 sec oils)
High accuracy differential manometer
Memory facility for reports
Specific reports for combustion, pressure, tightness test, temperature and room CO build-up
Infra-red output to optional printer
Designed to meet EN50379, BS7927, BS7967, IGE/11/UP/1B and Benchmark
Gas leak detector
12v in-vehicle charger
Infra-red printer, thermal paper
Infra-red printer, plain or duplex paper