The Easidew Portable Hygrometer is designed to provide reliable measurement of air or process gas dew point at the point of use, as a spot-check instrument. In most applications the inherently fast response of the ceramic moisture sensor is fast enough to give an acceptable sampling time to achieve a stable end result.
However, in some applications there is a need for a faster response - for example in cases where an expensive gas is to be tested, or where many measurements at different sampling points need to be made in real-time. For these applications the Easidew Desiccator provides a reliable and cost effective solution.
The Easidew Desiccator is a simple, in-line desiccant charge within a 316 stainless steel housing, provided with stainless steel gas in and out ports for direct connection between the gas sample line and the Easidew Portable Hygrometer's inlet quick-release coupling.
The desiccator is charged with 4Å molecular sieve, an extremely effective desiccant material.
This desiccant will last for months, even in regular use, and when saturated can either be re-generated by heating in a commercial or domestic oven, or be easily replaced with a new charge.
Operation time between re-activations is dependent on frequency and duration of usage and also application gas moisture levels.
Reduces sampling time by up to 85%
Simple to use
Body: 316L stainless steel
Connection to Easidew: Push fit into Easidew inlet fitting
Gas in connection: Push fit 6mm OD flexible pipe (PTFE)
Desiccant: Standard 4Å mol sieve
Other gas whetted: Stainless mesh, viton O-ring seal parts
Size: 82mm x 34mm