Home › Personal Safety › Fire Extinguishing › NSC Sicherheitstechnik B02750-00 Discovery Mounting Base
NSC Sicherheitstechnik B02750-00 Discovery Mounting Base
NSC Sicherheitstechnik have designed XP95 mounting bases that are compatible with all detectors in the Discovery range.
An earth connection is not required
for either safety or correct operation of
detectors. The ground (earth) terminal
is isolated and is provided for tidy
termination of grounded conductors
or cable screens and to maintain earth
continuity where necessary.
All terminals are marked according to
Bases have a wide interior diameter for
ease of access to cables and terminals
and there are two slots for fixing screws.
The slots enable two fixing screws to be
located at a spacing of 51 to 69mm.
Detectors fit into bases one way only,
without snagging, and require clockwise
rotation without push force to be
Universal address cards, known as XPERT
cards, are supplied with all bases. Consult
the coding guide in the installation
instructions to determine which pips are
to be removed from the card to give the
correct address. Lay the card on a flat
surface, pips down, insert a screwdriver
into the slot on the reverse of the pip to
be removed and give a firm twist.
When the card is coded insert it into the
slot in the side of the appropriate base,
making sure that the card locks itself
into place. As a detector is inserted into
the base, the remaining pips operate the
address buttons on the detector and the
detector electronics reads the address.
Apollo part number 45681-210
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page