Home › Laboratory › Melting Point Apparatus › Stuart SMP11 Analogue Melting Point Apparatus
Stuart SMP11 Analogue Melting Point Apparatus
Easy to operate - ideal for educational use
Supplied with safe spirit filled thermometer
With new safety features and easy to use, the SMP11 is ideal for use
in education. Supplied with a safe, spirit filled mercury free
thermometer, the low toxic blue spirit will not pose a health hazard
in the event of a breakage. Easy to follow instructions are printed
directly on to the apparatus and are available in most European
With a manually adjustable heating rate, the SMP11 will rapidly heat
samples up to 20°C per minute to the melt temperature and up to
the maximum temperature of 250°C. Accurate readings to within
1°C of the melt temperature can be achieved by using a slower
heating rate of between 1 and 10°C per minute.
Up to three samples can be viewed and tested at any one time.
Samples are illuminated by a bright white LED and viewed via a
magnifying lens. The magnifying lens can be detached for cleaning
using the simple to follow instructions printed on to the instrument.
Number of samples - Up to 3
Temperature range - 50°C to 250°C
Heating rate - 1 to 10°C per minute
Dimensions, mm (w x d x h) - 370 x 140 x 110
Net weight - kg 1.7
Electrical supply - 230V, 50Hz, 50W
IP Rating - 40
SMP11 - Melting point apparatus, complete with thermometer
and pack of 100 melting point tubes (open both ends)
SMP11/1 - Spare thermometer, spirit filled, 0°C to 250°C
SMP1/2 - Cooling plug (brass) for rapidly reducing heating block
temperature after use
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page