|  Use to
protect twisted pair Ethernet (10 base T and 100 base T) or Token Ring
networks with Cat 3,4 or 5 cabling and RJ45 connections.
Suitable for systems signalling
on up to eight wires of either shielded or unshielded twisted pair cable.
To protect coaxial Ethernet networks see here.
To protect data comms systems based on twisted pairs, such as RS 232 and
RS 485, click here.
Application
Use this protector on network cables that travel between buildings
to prevent transient overvoltage damage to:
computers
servers
repeaters
hubs
Features and benefits
 Let-through voltage
below equipment susceptibility levels to ensure effective protection for
your equipment.
Protection between
all sets of conductors closes all transient routes to equipment (see technical
note).
|
Provides repeated protection
in lightning intense environments.
Unlike some competing
devices the ESP Net-100 provides effective protection without impairing
the system's normal operation.
Low capacitance circuitry
prevents the start-up signal degradation associated with other types of
network protector.
Low in-line resistance
minimises unnecessary reductions in signal strength to maximise signalling
distance.
Sturdy ABS housing.
Convenient holes for
flat mounting.
Substantial earth stud
to enable effective earthing.
Supplied with short
(25cm) Cat 5 cable to enable neat installation.
Easy installation .
Straightforward and
comprehensive installation instructions .
5 year warranty.
ESP NET 100 Brochure
|
