Pre-programmed with all HACH LANGE analysis methods, for the
analysis of waste water, drinking
water and cooling/boiler water
Absorbance and transmission
Concentration for linear and nonlinear
Traceability starts with sampling
Reduce errors. Use RFID* technology and trace your samples
back to the sample location. All important information, such as
the sample location, sample taker, date and time are saved on
an RFID* tag on the sample bottle. And you can transfer this
data to the laboratory in seconds using RFID* in the DR 3900.
IBR+ increases the reliability of your measurement
Lot number and expiry date information is now included on the
2D barcode, this additional information is transferred to the
instrument and documented with the measurement value.
Rapid data updates
Programming of methods into a spectrophotometer has never
been so easy. Simply hold the cuvette test box in front of the
DR 3900 RFID* module, wait for the signal tone and it's done.
Measurement begins straight away with accurate evaluation
data for an accurate result.
Quality assurance made easy with AQA+
QA procedures can now be easily defined and documented
within the instrument without additional software.
Current batch certificates (for the purpose of GMP/GLP results
documentation) can be found on the RFID* tag on the cuvette
box. Thanks to this RFID* technology, all batch-specific
information can be retrieved immediately on the DR 3900 and
Alignment of laboratory and process analysis
You can compare your process result with the lalaboratory
reference value in the photometer via the LINK2SC connection
between the SC controller and the DR 3900. Data can be
exchanged via Ethernet bi-directionally, eg, matrix corrections
from process probes can be sent directly from the laboratory.
Data transfer is simple via USB or Ethernet
Transfer your measurement data easily via a USB stick or an
Ethernet connection. The same applies for software updates.
The DR 3900 can install the most up-to-date device software
from our website via Ethernet, so your photometer always has
the latest update.