 |
 |
  |
|
 |
|
| Introduction |
|
| The PEAK series of ovens and incubators has been designed and engineered using the latest computer aided design to facilitate production of all metal components on the latest CNC controlled production equipment. Both gravity convection and forced air circulation models are included
in the Peak series. The bench mounted models are available in four sizes
with a maximum operating temperature of 300°C, whilst the larger
floor standing models |
are available with fan assisted air circulation only, with a maximum operating temperature of 250°C. Incubators have a maximum temperature of 80°C. The ovens are constructed for long term reliability and depending on the choice of control system can perform simple drying processes or more complex and demanding heat treatment processes and long term stability testing of materials or components. |
|
|
|
| Stylish and robust - the outer cases are fabricated from corrosion resistant zinc coated mild steel and finished in two tone hard wearing stoved epoxy/polyester coating. The inner case is constructed from polished stainless steel. All units are provided with none-tilt bright nickel wire plated shelves with multi-position settings for convenient loading and unloading. Adjustable air ventilation - the chamber ventilation and exhaust vent are easily adjustable from the front control panel on all bench top models. Digital temperature control - the control module is able to house many variations of digital instrumentation with simultaneous display of measured and set temperature. Microprocessor based on/off controllers are fitted as standard. Where precise temperature control is more critical, a PID microprocessor based controller is available, also with digital temperature indication. Economy and efficiency - insulation around the oven chamber utilises totally encased fibre material. This material has a very low thermal mass and thermal conductivity, ensuring very efficient insulation. This also ensures reduced holding power, making the units economical to operate once set temperature has been reached. Door action - a flush fitting door latch with a concealed mechanism is both simple to use and provides a handle when unlatched. The lever action ensures gentle closure. The door seal design includes a newly formulated silicone compound, providing longer life and durability at maximum temperature. The design also allows convenient replacement if necessary. |
Control panel - the side mounted control panel avoids damage from accidental spillage. Safety standards - all units meet the relevant UK and European health and safety at work legislation and the performance criteria of BS 2648 and DIN 50-011. They are manufactured to comply with BS EN 61010; safety standard and also the low voltage and EMC European Directives. |
|
| Options: |
||
Range of overtemperature protection systems in accordance with DIN12-880
Part 2 Stoving and curing option
available for processes involving liberation of flammable vapours Timers: Process timers
- manual or automatic. Mechanical or electronic time switches Top access port for
independent probe Stacking frame Lockable door latch
|
Exhaust fan* Variable speed fan* Inert gas connection* Viewing window in door Interior light Air inlet filter Cable entry port* Door switch Stands & trolleys Chart recorders Sealed inner chamber
for use with inert gases |
|
| * These options may affect Chamber Uniformity |
||
|
|
||
