Plate type test clamp, Screwdown test clamp, Bimetallic connector, Oxide inhibiting compound

\| \| Flat Tape System \| Solid Circular System \| Cable and Wire System \| Accessories \| \| How to apply lightning protection \| Lightning Design Considerations \|
Test and junction clamps

Plate type test clamp

Maximum Conductor Size	Conductor Material	Weight each	Part No
26x12mm	Copper	0.62kg	CT405

Recommended fixing - countersunk woodscrew 1 1/2" x no.10 and wall plug.

Plate type test clamp

Screwdown test clamp

Maximum Conductor Size	Conductor Material	Weight Each	Part No
25x8mm	Copper	0.84kg	CT035

Recommended fixing - countersunk woodscrew 1 1/2" x no.10 and wall plug.

Bimetallic connector

Conductor Size	Weight Each	Part No
25x3mm aluminium tape to 25x3mm copper tape	0.19kg	CN910
8mm diameter aluminium conductor to 25x3mm copper tape	0.19kg	CN920

For joining aluminium to copper.

Particularly useful where an aluminium lightning protection system needs to be earthed using copper.

Recommended fixing - countersunk woodscrew 1 1/2" x no.10 and wall plug.

Bimetallic connector

Oxide inhibiting compound

For all the items in this range we recommend the use of oxide inhibitor when aluminium fittings are installed.

Oxide inhibitor is a non-water soluble, natural-petroleum based polymer grease that
seals electrical connections from oxygen and moisture.