HomePersonal SafetySafety Masks › Drager Parat 4720 & 4730 Escape Hoods


Drager Parat 4720 & 4730 Escape Hoods


Drager Parat 4720 & 4730 Escape Hoods

Drager PARAT Escape hoods were developed in cooperation with users - always with the focus on the fastest escape. Optimized operation and wearing comfort, a robust housing and tested filters guarantee that the wearer of the Drager PARAT is protected from toxic industrial and fire-related gases, vapours and particles for at least 15 minutes.

Where hazardous substances exist in your workplace, you can never entirely rule out the possibility of these substances leaking out into the air. However, with the correct safety precautions, including the use of the Drager PARAT 4500, you can escape safely.

READY FOR ESCAPE IN ONLY 3 STEPS

Exceptionally innovative and intuitive: When opening the packaging, the filter plug is automatically released from the filter. The filter is then deployed into operational position and the hood can be immediately donned. Thanks to the self-adjusting internal head harness, no additional adjustment is required. All you have to do is: open the packaging, remove and don the hood and leave the danger zone.

ROBUST AND ERGONOMIC

We at Drager know: Escape hoods and comparable equipment are usually carried in a closed state and rarely opened - only in situations of danger. That is why both, ergonomics and carrying comfort were considered when designing the packaging of the Drager PARAT. When on duty, the user can carry the escape hood on a belt or a shoulder strap, a grip clip or a belt clip. The PARAT Hard Case can also be mounted on the wall using a wallholder. Additionally, the robust packaging of the Drager PARAT protects the escape device from damage.

You can select between two packaging types: The Hard Case provides splash water protection (IP54) - the Soft Pack provides dust protection (IP5). Both packagings have windows to check the filter expiration date and the condition of the device.

RELIABLE PROTECTION

The escape hoods are equipped with high-performance filters. The filters reliably protect from a wide range of toxic industrial and fire-related gases, vapours and particles. Particularly convenient: The security seal on the packaging shows if the unit has been opened. In addition, the filter is tightly sealed with two filter plugs.

16 YEARS TOTAL SERVICE LIFE

Replacing the filter after 8 years will extend the service life of the Drager PARAT Escape Hood to 16 years in total. For this, Drager offers filter replacement service or an expert training for your employees. In the long term, this offers you great cost savings.

DRAGER PARAT 4700 INDUSTRIAL ESCAPE HOOD

  Use: protection against toxic industrial gases, vapours and particles
  Filter: ABEK P3 Filter
  Approval: according to DIN 58647-7 for filtering escape devices; filter additionally tested in accordance with EN 14387:2004 for gas filter(s) and combined filter(s)
  Packaging types: available in Hard Case and Soft Pack

DRAGER PARAT 5500 FIRE ESCAPE HOOD

  Use: protection against toxic fire-related gases, vapours and particles
  Filter: CO P2 Filter
  Approval: according to EN 403:2004 for fire escape hoods, additionally tested for the use against H2S (at 2,500 ppm) in accordance with DIN 58647-7
  Packaging types: available in Hard Case, Soft Pack and Single Pack

DRAGER PARAT 7500 FIRE AND INDUSTRIAL ESCAPE HOOD

  Use: protection against toxic industrial gases, vapours, particles and fire-related gases
  Filter: ABEK CO P3 Filter
  Approval: according to EN 403:2004 for fire escape hoods; according to DIN 58647-7 for filtering escape devices; filter additionally tested in accordance with EN 14387:2004 for gas filter(s) and combined filter(s)
  Packaging types: available in Hard Case and Soft Pack
  Alternatively available with an elastomeric neck seal for increased protection

DRAGER PARAT TRAINING HOOD

  Use: for training purposes
  Filter: Hood comes with a filter dummy
  Packaging types: available in Hard Case, Soft Pack and Single Pack


Data Sheet

Ordering Information


Drager PARAT

Drager PARAT 4720, Soft Pack R59421
Drager PARAT 4730, Hard Case R59431
Drager PARAT 5510, Single Pack R59415
Drager PARAT 5520, Soft Pack R59425
Drager PARAT 5530, Hard Case R59435
Drager PARAT 7520, Soft Pack R59427
Drager PARAT 7530, Hard Case R59437
Drager PARAT 7520e (with elastomeric neck seal), Soft Pack R59428
Drager PARAT 7530e (with elastomeric neck seal), Hard Case R59438
Drager PARAT Training Hood, Single Pack R59410
Drager PARAT Training Hood, Soft Pack R59420
Drager PARAT Training Hood, Hard Case R59430

Accessories

Replacement Filter Set: Drager PARAT 4700 (includes ABEK P3 filter and security seal) R59471
Replacement Filter Set: Drager PARAT 5510 (includes CO P2 filter and label) R59474
Replacement Filter Set: Drager PARAT 5520/5530 (includes CO P2 filter and security seal) R59475
Replacement Filter Set: Drager PARAT 7500 (includes ABEK CO P3 filter and security seal) R59477
Wallholder PARAT Hard Case R59451
Waist Belt, textile 6733934
Waist Belt, plastic R53026
Shoulder Strap R59461
Belt Clip R59456
Grip Clip R59455
Adapter Plate for PARAT Soft Pack R58742
D-Ring for PARAT Hard Case R59457



Drager

Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.

Back To Last Page