Home › Personal Safety › Safety Masks › MSA OptimAir 3000 Full Face Mask
MSA OptimAir 3000 Full Face Mask
It comes in three configurations to get you started. A wide variety of accessories is available to suit your own custom requirements.
OptimAir 3000 [ the all-rounder ] - The OptimAir 3000 is our standard version designed for a diverse range of applications. This version delivers 130 l/minute airflow and comes with a NiMH battery, battery charger and comfort belt. A large assortment of full face masks, hoods and visors are available to choose from. Three filters can be used in combination to give you five levels of protection.
OptimAir 3000 A [ where high airflow is required ] - The OptimAir 3000 A delivers 160 l/minute airflow and is supplied with the OptimAir Mask [Advantage line] plus a decon belt for easy cleaning and decontamination to meet asbestos removal regulations [check local recommendations]. In addition, it comes with a NiMH battery, battery charger and one pack of ten particle filters. The unit has been designed exclusively for use with particle filters.
OptimAir 3000 EX [ for potentially explosive environments ] - The OptimAir 3000 EX is fitted with ignition-proof components for use in potentially explosive [ATEX] areas and has the same features as the standard OptimAir 3000. It delivers 130 l/minute airflow and comes with a NiMH EX battery, EX battery charger, and comfort belt. Choose from our complete assortment of full face masks, hoods and visors to meet your individual specifications.
OptimAir 3000 at a glance:
Ergonomic Design
 Light weight to reduce back strain
Optimised profile to reduce bulkiness
Hose stays close to your body for added safety
Choice of belts for added comfort or decontamination
Filter covers can be cleaned separately
Advanced Technology
Fully microprocessor-controlled
TabTec filter technology reduces weight, size and filter inventory
Automatic headtop detection
Automatic airflow regulation
Greater Safety & Comfort
Protects against biologicals, chemicals, dusts, aerosols and gases [using the appropriate filters]
Automatic airflow regulation lets you breathe normally, reducing body heat and increasing your ability to work
Airflow monitoring prevents improper use of filters or head gear
Alarm is sent through hose and can be heard in loud environments
Five-level battery reserve indication
Delayed off prevents accidental shutdown
To avoid any misuse, the OptimAir 3000 EX is not compatible by design with the standard OptimAir battery packs
|
Easy Operation
One-button operation
Automatic calibration
Long-life battery
Shower-proof for easy decontamination [IP54]
One-click battery change
Easy to clean
Exclusive stackable filter system
Hazards
Chemical Splash
Nuisance Odor
Particles & Dust
Toxic Atmosphere (IDLH)
Toxic Atmosphere (Non-IDLH)
Approvals & Standards
[OptimAir 3000, OptimAir 3000 A, OptimAir 300 EX]
EN 12941 [TH2 hoods and visors] [TH3 hooded helmet]
EN 12942 [TM3 full face masks]
Compliant with EMC 89/336/EEC
[OptimAir 3000 EX]
BVS 07 ATEX E 38
II 2G Ex ib IIB T4
II 2D Ex ibD 21 T130 C
Applications
Agriculture
Chemical
Foundries & Metal Production
Oil & Gas
Paper & Pulp
Power Plants & Electricity
Spray Painting
Ordering Codes
10049557 - OptimAir 3000 [Standard unit with 130 l airflow, NiMH Battery,
Standard Charger and Comfort Belt]
10049558 - OptimAir 3000 A [Unit with 160 l airflow, OptimAir Mask w/Hose,
Particle Filter [pack of 10], NiMH Battery,
Standard Charger and Decon Belt]
10049559 - OptimAir 3000 EX [Unit with 130 l airflow, NiMH EX Battery,
EX Charger and Comfort Belt]
|
Data Sheet
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page
|
|
|
|
