HomeLaboratoryWater Baths › Grant Instruments RC Series High Precision Recirculating Chillers



Grant Instruments RC Series High Precision Recirculating Chillers


Powerful cooling is often required in many different industrial and scientific applications in order to remove the mechanical or electrical heat produced in equipment. The Grant Instruments RC Series High Precision Recirculating Chillers are perfect for these applications.

In the days before water became an expensive commodity, it was tap water that was often used as a source of powerful and high pressure cooling. The difference between tap water and the RC Series Chillers are that the RC Series Chillers provide a constant flow at an exact and repeatable temperature. They can also operate at temperatures as low as -10degC. The RC Chiller Series removes the use of mains water and also minimises scaling and corrosion of the equipment that is being cooled. In addition, alarms will warn the operator of any temperature or flow changes.

There are four different models of RC Series High Precision Recirculating Chillers available. Each model includes a temperature control unit, small reservoir, refrigeration unit and circulating pump all housed in a single outer case.

The RC Series High Precision Recirculating Chiller range is suitable for both open and closed loop circulation.

  Temperature range -10 to 60C
  Stability 0.25C
  Choice of models with different cooling power - from 350 to 3000W
  Efficient, reliable and cost-effective alternative to cooling with mains water
  Autotune facility for optimal temperature control performance



Data Sheet

Ordering Information


Recirculating chiller 350W including standard pump, audible alarm and flow fail cut-out, -5 to 60C RC350G
Recirculating chiller 400W including standard pump, audible alarm and flow fail cut-out, -10 to 60C RC400G
Recirculating chiller 1300W including standard pump, audible alarm and flow fail cut-out, -10 to 60C RC1400G
Recirculating chiller 3000W including standard pump, audible alarm and flow fail cut-out, -10 to 60C RC3000G

Accessories

Bypass for recircuulating chiller RC BYP
Pressure gauge for recirculating chiller RC PR
Priming reservoir for recirculating chiller PRES

Pipe fittings

Pipe fitting pair recirculating chiller, for 9mm i.d. hose RC HF9
Pipe fitting pair recirculating chiller, for 12mm i.d. hose RC HF12
Pipe fitting pair recirculating chiller, for 17mm i.d. hose RC HF17



Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.


Back To Last Page


Grant Instruments

Circulating Baths

LT ecocool Refrigerated/Heating Circulating Baths
Heated Circulating Bath Range
RC Series Recirculating Chillers
Refrigerated Circulating Bath Range

Unstirred Water Baths

JB Academy
JB Nova
SBB Aqua Plus Series
SUB Aqua Pro

Shaking Water Baths

LSB Aqua Pro
OLS Aqua Pro

Ultrasonic Water Baths

XUB Series
XUBA Series

Sous Vide

Expert Range Sous Vide Water Baths
SV200 Portable Immersion Circulator

Inspissators

TBT-T100IN

Dry Block Heaters

BTD Dry Block Heating System
BT5D Digital Block Heater
QBA Series (Analogue)
QBD/QBH Series (Digital)

High Temperature Bath/Circulators

HED Series

Flow Heaters

FH16D

Obsolete Products

BTA Dry Block Heating System
GD100 Series (Digital)
GD100R Series (Digital)
GD120 Series (Digital)
GD120R Series (Digital)
GLS Aqua Plus
GR150 Series (High Performance)
GR150R Series (High Performance)
GP200 Series (High Performance)
GP200R Series (High Performance)
GLS 400 (Linear)
JB Aqua Series
JB Aqua Plus Series
MXB Series
OLS 200 (Combined Orbital/Linear)
PB1 Transparent
Sub Series
Sub Aqua Series
Sub Aqua Plus Series
XB Series

Want A Quotation?

Please fill out the following fields and we will e-mail you a quotation shortly.

Keison International Ltd. trading as:
Keison Products, VoIPon Solutions & 4Gon
keison VoIPon Solutions 4Gon