HomeLaboratoryFurnaces, Ovens & Incubators › Nabertherm


Chamber Kilns/Standard Equipment N 100/G - N 660/H
Elements mounted on support tubes give free radiation of heat, longer element and wall life; optimized element positioning for excellent temperature uniformity
Easy-to-use Nabertherm controller, precise temperature regulation
Handy quick-release locking wheel, door can be secured with padlock
Base for ergonomic loading height included in delivery. Optional: Special height or running on casters
Large, ergonomic door handle
Solid-state relays control the kiln heating. Operating silently and nearly wear-resistant, the solid-state relays switch with short pulses, giving excellent temperature uniformity and fast response times.
Flue in the center-rear section of the ceiling ensures uniform flow of exhaust gasses (roof flap for N 440 and N 660)
Double-walled housing for “Cool-Touch” outer surface with side panels made of textured stainless steel (N 100/G - N 300/H)
Infinitely adjustable air inlet damper for optimum air supply during firing and reduced cooling time. Automatic control available as an option.
Silicon carbide floor plate protects the floor heating elements. It is easily removed to permit convenient cleaning of the furnace bottom and element maintenance.

We recommend: To achieve a long service life of the brick lining and heating elements, the kiln should not be fired every cycle at its maximum rated temperature. For process temperatures up to 900 °C we recommend models N 100/G - N 660/G. Up to 1230 °C we recommend models N 100 - N 660, and for regular high firing temperatures above 1230 °C we recommend our models N 100/H - N 660/H.


Automatically closing inlet air flap for our chamber kilns N 100/G - N 300/H and N 140E - N 280E. For a better ventilation of the furnace, improved firing results. (Available as a retrofit for existing furnaces).

Drying shelf set mounts on top of models N 100.. - N 300/H and N 140 E - N 280 E..

Base in special height or on casters.

Loading rack for chamber furnaces. The entire kiln load may be ergonomically inserted or extracted in one movement using a pallet lift truck (N 150 ff). This allows the kiln to be fired again more quickly.

Batts, plates and posts. Matching sets of kiln furniture are available for every type of furnace.

If you have a question, do not hesitate to ask us!

Installation Service
Professional installers moving a chamber kiln into a basement studio.

As your dealer, we can help arrange professional installation and assembly of your kiln into your studio.

All of our kilns ship completely assembled in one piece. While other manufacturers sell sectional designs, we do not because it negatively affects the performance and safety of our kilns. A one-piece design may take more effort on the day you install your kiln, but its effortless operation every day thereafter more than makes up for this.

Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.

Muffle, Preheating & Ashing Furnaces

Muffle, Preheating & Ashing Furnaces Index

Tube Furnaces

Tube Furnaces Index

Chamber Furnaces

Compact Chamber Furnaces (N, LH & LF)

High Temperature Vacuum Furnaces

Vacuum Furnaces with Graphite, Molybdenum or MoSi2 Heating (VHT)

Melting Furnaces

Melting Furnaces (K & KC)

Annealing Furnaces

Annealing and Hardening Furnaces (N)

High-Temperature Furnaces

High-Temperature Furnaces (HTC, LHT, HT & HFL)

Assay Furnaces

Assay Furnaces (N 110/HS)

Glass Furnaces

Laboratory Melting Furnace (SC 8)

Non Laboratory Furnaces

Furnaces for Applications outside the Laboratory


300 degC Ovens (TR)

Measurement and Control Systems

Standard Controllers
Alternatives for High-Performance Control

Arts & Crafts

Arts & Crafts Index

Want A Quotation?

Please fill out the following fields and we will e-mail you a quotation shortly.