HomeEnvironmentalPower Analysers › Seaward PV200 Solar PV Installation Tester

Seaward PV200 Solar PV Installation Tester

Affordable and efficient PV diagnostic tool

  All-in-one commissioning tests and I-V curve tracing, in accordance with international standards IEC 62446:2016 and IEC 61829:2015
  Instantly view detailed I-V curves in the field using the Android PVMobile App
  Instantly send data from the field back to the office using Android PVMobile App
  Tests individual PV modules or strings
  Clear results display, even in direct sunlight

The PV200 provides a highly efficient and effective test and diagnostic solution for PV systems, carrying out all commissioning tests required by IEC 62446:2016 and performing fast and accurate measurement of I-V curves in accordance with IEC 61829:2015.

With direct connection to individual PV modules or strings using the supplied lead sets, tests can be conducted easily and within a matter of seconds at the press of a single button.

A high contrast display is clearly visible in direct sunlight and shows open circuit voltage, short circuit current, maximum power point voltage, current and power, as well as the fill factor of the PV module or system under test, and insulation resistance (as part of an auto sequence or a discrete probe to probe measurement). If the measured curve deviates from the expected profile, the PV200 alerts the user to this, identifying the need for further analysis.

Detailed and colour I-V and power curves, can be viewed instantly once data is transferred to the PVMobile Android App using wireless NFC connectivity.

PVMobile displays measured I-V and power curves for visual analysis of the curve shape, enabling common problems such as shading, defective cells or poor electrical connections to be identified.

Instantly view detailed I-V and power curves in the field using the Android PVMobile App

Simply touch an NFC-enabled Android device running the PVMobile app to your PV200. Detailed I-V characteristic measurements are transferred, allowing the I-V and power curve to be viewed in full colour detail. PVMobile also enables I-V curve correction for standard test conditions (STC 1000 W/m2, 25°C) using irradiance and temperature data from the Survey 200R irradiance meter, to allow comparison with manufacturer’s curve data, included in the comprehensive PVMobile database.

Data Sheet

Ordering Information

PV200 Standard Test Kit
PV200 PV tester and I-V curve tracer, AC/DC current clamp, 2 x MC4 test lead (red & black), 2 x 1.5m 4mm test leads/probes + alligator clips, Type A to mini B USB cable, 6 x alkaline battery (AA) 1.5V, Quick Start Guide, Rugged carry bag, PV200 Calibration Certificate, Download link for entry level PC datalogger software, operating instructions, USB driver for download to PC and SolarCert Elements software demo

PV200 Solarlink™ Test Kit
As per the PV200 standard test kit
Survey 200R multi-function irradiance meter with suction mount PV module temperature sensor

PV200 Solarlink™ Test Kit + SolarCert Elements v2 software
As per the Solarlink™ Test Kit
SolarCert Elements v2 software (English language only)

Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.

Back To Last Page


PAT Testers

Apollo 400
Apollo 500
Apollo 600
PATGuard 3 Software
PrimeTest 50
PrimeTest 100
PrimeTest 250
Primetest 250+
Supernova Elite

Solar PV Test Equipment

MCS Solarlink Test Kit
PV150 Solar Installation Test Kit
PV200 Solar PV Installation Tester
Solar Power Clamp
SolarSurvey 100/200R Series Irradiance Meters
Solar Utility Pro

Installation Testers

PowerTest 1557 Multi Function Installation Tester

Proving Units

PH3 Proving Unit
PH3 Flat Nose Proving Unit


HV Indicators
HV Phasing Units
SDR Series HV Safe Discharge Rods

Want A Quotation?

Please fill out the following fields and we will e-mail you a quotation shortly.