Home › Environmental › Parameter Measurement › LSI LASTEM Temperature And Relative Humidity Inside Materials
LSI LASTEM Temperature And Relative Humidity Inside Materials
LSI LASTEM have designed this sensor in order to aid the monitoring of temperature and air Relative Humidity (RH%) inside waste material
or bio-filter.
Suitable for when materials are porous and without water content, these sensors are for portable or short term measurement applications.
It is possible to use the E-Log data logger in combination with the DME730 when placed at 10-50 m distance by DWAxxx cable.
With the DME731, you can use the M-Log or R-Log data logger, which is placed directly on the
integrated sensor arm.
Downloads
Datasheet
|
|
Specifications
Temperature
Principle Pt100 1/3 DIN A
Measuring range -50�+80°C
Uncertainty 0,10°C (0°C)
Output Pt100 DIN-IEC 751 table (EN 60751)
Resolution 0,01°C
Response time (T90 air) 5 min (air flow 0,2 m/s)
Relative humidity
Principle Capacitive
(Air Relative Humidity measurement)
Measuring range 0�100 RH%
Uncertainty ±1,5% RH (5-95%)
Output 0�1 Vdc
Response time 10 sec T63 (1 m/s air speed)
General information
Protection type IP54
Power consumption None
Operative temperature -50�+80°C
Materials Stainless steel AISI304
Input type on E/M/R-Log Analog
|
Ordering Information
DME730 DME731
Accessories
DMA672.1 Temperature and relative humidity
sensor (spare part)
DWA510 Cable L = 10 m for DME730
DWA525 Cable L = 25 m for DME730
DWA526 Cable L = 50 m for DME730
|
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page
|
|