HomeLightning & Surges Protection › Dehn + Sohne - Protective and Auxiliary Equipment


Dehn + Sohne - Protective and Auxiliary Equipment


DEHNcare APS and ESH (Nominal voltages up to 1000 V)

  Prevent injuries - Stay healthy
  High wearing comfort
  High degree of protection and low wear due to energy-absorbing nanoparticles
  Excellent visibility due to anti-mist coating and high light transmittance
  Face shield with clip for easy insertion into the helmet
  Certified according to the requirements of directive 89/686/EEC on personal protective equipment

Part Numbers

Arc-fault-tested Face Shield with Clip and Chin Protector

  APS CL2 SC - 785 746
  APS 12C SC - 785 747

Arc-fault-tested Safety Helmet with Strap and Chin Protector

  APS CL2 FS - 785 748
  APS 12C FS - 785 749

Safety Helmet for Electricians

  ESH 1000 S Y - 785 740
  ESH 1000 S W - 785 741
  ESH 1000 S O - 785 742
  ESH 1000 S B - 785 743
  ESH 1000 S R - 785 744



Arc-fault-tested Face Shield with Clip and Chin Protector



Arc-fault-tested Safety Helmet with Strap and Chin Protector



Safety Helmet for Electricians


DEHNcare APG Arc-Fault-Tested Protective Gloves

  Prevent injuries - Stay healthy
  For protection against thermal and mechanical risks
  Excellent fit due to special glove cut
  Good touch sensitivity due to soft leather inner surface of the gloves
  Breathable materials maximise wearing comfort
  Certified according to the requirements of directive 89/686/EEC on personal protective equipment

Part Numbers

  APG 8 - 785 796
  APG 9 - 785 797
  APG 10 - 785 798
  APG 11 - 785 799
  APG 12 - 785 800



Arc-Fault-Tested protective Gloves


PPE - Personal Protective Equipment (Nominal voltages up to 1000 V)

  For working on live parts
  Insulating gloves combine excellent fit and high elasticity with maximum insulation resistance
  Two different models to suit your needs

Maintenance test - The pneumatic glove tester allows to perform maintenance tests in compliance with the relevant standard and even detects minimal damage to the insulating gloves. Gloves should be inspected before each use, therefore the glove tester is an indispensable and very practical safety tool.

Part Numbers

Face Shield with Strap

- Arc-fault-tested in accordance with GS-ET-29 test principle
- High Visible Light Transmittance (VLT)
- Coating on both sides prevents misting up, polished edges, 1.5 mm thick
- The face shield can be locked into the use and non-use position
- Suitable for all common safety helmets for electricians

  SSC ASH NS - 785 427

NH Fuse Puller with Sleeve

- NH fuse puller in accordance with DIN VDE 0680 Part 4 with sleeve made of coated cotton fabric
- For actuating fuses of sizes NH00, 1, 2 and 3

  NHS AG 00 3 NS - 785 645

Insulating Gloves, Category M

For high mechanical stress

  IHS 00 M 9 NS - 785 491
  IHS 00 M 10 NS - 785 492
  IHS 0 M 9 NS - 785 493
  IHS 0 M 10 NS - 785 494

Insulating Gloves, Category RC

Resistant to acid, oil, ozone, high mechanical stress and extremely low temperatures

With inner coating and textured gripping surface

  IHS 00 RC 9 NS - 785 495
  IHS 00 RC 10 NS - 785 496



Face Shield with Strap



NH Fuse Puller with Sleeve



Insulating Gloves, Category M



Insulating Gloves, Category RC


Insulating Equipment for Airport Lighting Systems (Nominal voltages up to 17.5 kV / 15 ... 60 Hz)

  Equipment for live maintenance and repair work on airport lighting systems
  Insulated platform for insulating the operating location
  Circumferential, fluorescent marker tape indicates the maximum permissible height for plants in green spaces and can be used as reflector at night
  Two removable kneeling cushions for comfortable working
  Replaceable skids for easy positioning and transport

Application - The insulated platform and the insulating extension are used for e.g. replacing illuminants at airport lighting systems under live conditions. The insulated platform insulates the operating location during live working. The insulating extension is used as insulating intermediate section between the ratchet (with 13 mm square) and operating head (e.g. 17 mm bushing).

Part Numbers

Insulating Insert for buried Beacons

  IE UF LF 150 - 785 440
  IE UF LF 200 - 785 441

IW insulated Platform

  IW 17.5 890 650 180 - 785 408

Insulating Extension

With 13 mm square and width across flats 17 for torque limiter

  IV VK13 SW17 1000 - 785 445



Insulating Insert for buried Beacons



IW insulated Platform



Insulating Extension


Covering Material and Insulated Mats

  Protection against accidental and direct contact with live parts
  For covering adjacent live parts
  Available in different lengths, widths, thicknesses and colours
  Insulated rubber mats for insulating the operating location

Part Numbers

Insulated Covering Material (Crystal Clear)

  ATK 135 50M NS - 785 465
  ATK 135 ..M NS - 785 466

Insulated Covering Material (Transparent)

  ATK 120 25M NS - 785 467
  ATK 120 ..M NS - 785 468

Insulated Covering Material (Chloroprene Rubber)

  WBN 200 2,5M NS - 785 646

Insulated Covering Material (Chloroprene Rubber)

  ATN 140 10M NS - 785 471
  ATN 140 ..M NS - 785 472

Insulated Rubber Mats for Insulating the Operating Location

  IMG SI 1M NS - 785 455
  IMG SI 10M NS - 785 457
  IMG SI ..M NS - 785 456

Insulated Mats up to 50 kV

  IMG SAN 1M 10M - 785 459
  IMG SAN 1M ..M - 785 458



Insulated Covering Material (Crystal Clear)



Insulated Covering Material (Transparent)



Insulated Covering Material (Chloroprene Rubber)



Insulated Covering Material (Chloroprene Rubber)


Lock-out Systems (Nominal voltages up to 1000 V)

  Protection against reconnection
  Symbol "Nicht schalten" [Do not close the circuit] acc. to German regulations (VBG 125)
  Insulating plug for screw inserts
  Insulating blade for NH fuse holders
  Lock-out systems for circuit breakers

Part Numbers

Insulating Plug

  SE E14 - 785 639
  SE E18 - 785 650
  SE E27 E33 - 785 640

Insulating Blade

  SE NH00 - 785 641
  SE NH0 - 785 642
  SE NH1 - 785 643
  SE NH2 3 -785 644

Lock-out System

  SE REG 1TE - 785 638
  SE REG 2TE - 785 652
  SE REG 3TE - 785 637



Insulating Plug



Insulating Blade



Lock-out System


Protective and Auxiliary Equipment Brochure

Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.

Back To Last Page

Dehn

Surge Arresters & Isolating Spark Gaps

DEHNcord Type 2 Surge Arresters
DEHNguard Modular Single-Pole Surge Arrester for D.C. Applications
DEHNpatch Arrester for Data Networks and Ethernet Applications
DEHNshield Multipole Combined Lightning Current And Surge Arresters
DEHNventil Multipole Modular Combined Lightning Current And Surge Arresters
DSP Mains Connection Boxes
DSP SH Mains Connection Boxes
EXFS 100 / EXFS 100 KU Isolating Spark Gaps
EXFS L / EXFS 100 Isolating Spark Gaps
TFS / KFSU Isolating Spark Gaps

Safety Equipment

PHE III Voltage Detectors
PHE Voltage Detector
ASP Non-Contact Voltage Detector
HSA 205 High-Voltage Indicator
PHG II Voltage Detector
PHE/G d.c. Voltage Detector
PHV Two-pole Phase Comparator
PHV I Single-pole Phase Comparator
DEHNcap Voltage Detecting Systems
IS STK Insulating Stick Kit with Silicon Rubber Insulator
IS STK Insulating Stick Kit
IS Insulating Sticks with Silicon Rubber Insulator
IS Insulating Sticks
SCS Switching Sticks with Silicon Rubber Insulator
Equipment for Voltages up to 1000 V
Single-pole Earthing and Discharge Devices

Earthing

Air-termination Rods
Pipe Clamps For Hazardous Areas

Live Working

Cleaning Equipment
Protective and Auxiliary Equipment

Safety Equipment for Electric Railway

Voltage Detectors
Insulating Stick Kit
SDS Voltage Limiting Device

Want A Quotation?

Please fill out the following fields and we will e-mail you a quotation shortly.

Keison International Ltd. trading as:
Keison Products, VoIPon Solutions & 4Gon
keison VoIPon Solutions 4Gon