HomeEnvironmentalParameter Measurement › LSI LASTEM Part Number Index


LSI LASTEM Part Number Index



The following list is part numbers from the LSI LASTEM range:

BSC012 Power supply unit for DEC301 (when connected to PC), IP42 for indoor use
BSC012 Power supply unit for DEC301 (when connected to PC), IP42 for indoor use
BSC012 Power supply unit for DEC301 (when connected to PC), IP42 for indoor use
BSC015 Power supply 220 Vac/9 Vdc. Indoor use
BSC015 Power charger
BSC015 Power charger
BSC015 Power charger
BSE004 Pitot tube inox L=350 mm, diam 7 mm used with differential pressure sensors
BSE006 Pitot tube inox L=500 mm, diam. 7 mm used with differential pressure sensors
BSE010 Pitot tube inox L=1000 mm, diam 8 mm used with differential pressure sensors
BSZ306.1 CommNet module. Automatic Communication software. (Price for one station)
BSZ306.2 CommNet additional module to BSZ306.1, GPRS features. (Price for one station)
BSZ310 InfoFLUX Thermal Transmittance calculation program (Price for one station)
BSZ311 SQL-GIDAS module. Data storing into SQL data base, viewer. (Price for one station)
BSZ313 Thermal comfort indexes module (Price for one station)
BSZ315 Thermal cold environments indexes module (Price for one station)
BSZ317 Thermal heat stress indexes module (Price for one station)
BSZ411 XPanel module (Price for one station)
BSZ420 Gidas-Penman Evapotraspiration module (Price for one station)
BSZ422 Gidas-ADM Odour dispersion program (Price for one station)
BSZ425 Gidas-Synop (Price for one station)
BVA304 Portable tripod
BVA304 Tripod
BVA308 Pole H.80 cm for meteo sensors on BVA304 tripod
BVA311 Stand for n.4 sensors and one RLog module on BVA304 tripod
BVA312 Stand for n.4 sensors and one RLog module on BVA311 stand
BVA313 Stand and arm for n.4 sensors and one RLog module on the wall
BWA047 Soft-case for M/R-Log plus 2-3 sensors
BWA048 Carrying bag for BVA304 tripod and stands
BWA314 Shockproof, air tight carrying case(52x43x21 cm)
BWA314 Shockproof air tight carrying case
BWA315 Shockproof, air tight carrying case (60x43x21 cm)
CAO622 Display 96 x 48mm; Analogue input (mA, V, Ohm, TCK, TCJ, Pt100, Pt1000). 10...230V power supply
CAO623 Display 96 x 48mm; Analogue input (mA, V, Ohm, TCK, TCJ, Pt100, Pt1000). N.2 output relays, 10...230V power supply
CAO632 Display 96 x 48mm ; Pulse input. 10...230V power supply
CAO633 Display 96 x 48mm ; Pulse input. N.2 output relays, 10...230V power supply
CLO299 1/2" gas sliding fitting for theraded duct connection
CLO305 Sliding flange for installation in ducts
CSIT.T.10 ACCREDIA type calibration certificate
CSIT.T.10 Calibration certificate. ACCREDIA type
CSIT.T.10 Calibration certificate. ACCREDIA type
CSIT.T.10 Calibration certificate. ACCREDIA type
CSIT.T.10 Calibration certificate. ACCREDIA type
CSIT.T.20 Calibration certificate. ACCREDIA type
CSIT.T.20 Calibration certificate. ACCREDIA type
CSIT.T.20 Calibration certificate. ACCREDIA type
CSIT.T.20 Calibration certificate. ACCREDIA type
CSIT.T.35 Calibration certificate. ACCREDIA type
CSIT.T10 Temperature calibration certificate. ACCREDIA type
CSIT.T10 Temperature calibration certificate. ACCREDIA type
CSIT.T10 Pt100 sensor SIT calibration certificate. N.4 calibration points (*)
CSIT.T15 Pt100+RH capacitive sensor SIT calibration certificate for Pt100 and ISO for RH (**)
CSIT.T20 Pt100 sensor (ESU121, EST131) SIT calibration certificate. N.3 calibration points
CSIT.T25 Pt100 double sensor (ESU102, EST130) SIT calibration certificate. N.3 calibration points
CSIT.T30 Pt100 sensor (ESU121, EST131) + utility SIT calibration certificate. N.3 calibration points
CSIT.T35 Pt100 double sensor (ESU102, EST130) + utility SIT calibration certificate. N.3 calibration points
CSIT.T40 Pt100 sensor + utility SIT calibration certificate. N.4 calibration points (*)
CSIT.T45 Pt100+RH capacitive sensor SIT calibration certificate for Pt100 and ISO for RH (**)
CWO070 Extra cable for DLA400 (each m)
DEA207 Converter for DND207, range 0-5 m/s, output 4-20 mA, power supply 12 Vdc
DEA209 Converter for DND209, range 0-5 m/s, output 4-20 mA, power supply 12 Vdc
DEA251 Power supply 220Vac/12Vdc converter. IP65
DEA251 Power supply unit 220 Vac/12 Vdc, IP65 for outdoor use of DEC302 or DEC304
DEA251 Power supply unit 220 Vac/12 Vdc, IP65 for outdoor use of DEC302 or DEC304
DEA251 Power supply unit 220 Vac/12 Vdc, IP65 for outdoor use of DEC302 or DEC304
DEA252 Power supply 220Vac/24 Vac, IP65 for outdoor use of DEC303 or DEC305
DEA252 Power supply 220Vac/24 Vac, IP65 for outdoor use of DEC303 or DEC305
DEA252 Power supply 220Vac/24 Vac, IP65 for outdoor use of DEC303 or DEC305
DEA260 Power supply 220Vac/14Vdc 0,6 A converter. Indoor use
DEA260 Power supply 220Vac/14Vdc 0,6 A converter. Indoor use
DEA260.1 Power supply 220Vac/14Vdc 0,6 A converter, free wires. Indoor use
DEA260.1 Power supply 220Vac/12Vdc for DEC010
DEA260.1 Power supply 220Vac/12Vdc for DEC019
DEA280 0..20 mm/4..20 mA, 24 Vac, Integrator converter for rain gauges
DEA282 0..20 mm/0..5 Vdc, 24 Vac, Integrator converter for rain gauges
DEA285 0..20 mm/4..20 mA, 12 Vdc, Integrator converter for rain gauges
DEA300 Bluethooth module
DEA420.1 Sensor Transducer Box. Inputs for V, 2xPt100, Hz
DEA420.2 Sensor Transducer Box. Inputs for V, Pt100, Thermocouple, Hz
DEA485 Modbus sensor box
DEA504 Line drivers RS232. R/M/ELog side
DEA504 Line driver RS232. PC side
DEA509 1 port rs-232/422/485 modbus tcp to serial communication gateway.
DEA550 Modem for Ethernet lan, 12 Vdc. Complete with power charger
DEA604 Mini Gender charger DB9M-DB9M (required only for R/Mlog connection)
DEA718 "Dual band" GSM-GPRS/data modem including modem+antenna (M/R-Log compatibility)
DEA718.1 "Dual band" GSM-GPRS/data modem including modem+antenna (ELog compatibility)
DEA852 Signal amplifier for pyranometers. Requires DWAxxx cable
DEA852 Signal amplifier for pyranometers. Requires DWAxxx cable
DEA852 V input, 0/4-20 mA output, 9-30 Vdc power supply. Output by DWAxxx cables
DEA854 Signal amplifier for pyranometers. Connection by free wires terminal
DEA854 Signal amplifier for pyranometers. Connection by free wires terminal
DEA854 V input, 0/4-20 mA output, 9-30 Vdc power supply. Output by terminals
DEB518 USB interface
DEC010 Radiomodem PC (or MASTER data logger) side, VHF-200 mW erp, including vertical dipole antenna 5 m cable
DEC015 Radiomodem SLAVE data logger side, VHF-500 mW erp, including 3 elements Yagi antenna 10 m cable
DEC018 Radiomodem SLAVE data logger side, UHF-500 mW erp, including 6 elements Yagi antenna 10 m cable
DEC019 Radiomodem PC (or MASTER data logger) side, UHF-500 mW erp, including vertical antenna 5 m cable
DEC251 Stem one-direction antenna
DEC251 Stem one-direction antenna
DEC251 Stem one-direction antenna
DEC301 Receiver with RS232 port for cordless sensors
DEC301 Receiver with RS232 port for cordless sensors
DEC301 Receiver with RS232 port for cordless sensors
DEC302.1 N.4 0/420 mA-output channel wireless receiver. Power supply 828 Vdc
DEC302.1 N.4 0/420 mA-output channel wireless receiver. Power supply 828 Vdc
DEC302.1 N.4 0/420 mA-output channel wireless receiver. Power supply 828 Vdc
DEC303.1 N.4 0/420 mA-output channel wireless receiver. Power supply 24 Vac
DEC303.1 N.4 0/420 mA-output channel wireless receiver. Power supply 24 Vac
DEC303.1 N.4 0/420 mA-output channel wireless receiver. Power supply 24 Vac
DEC304.1 N.8 0/420 mA-output channel wireless receiver. Power supply 828 Vdc
DEC304.1 N.8 0/420 mA-output channel wireless receiver. Power supply 828 Vdc
DEC304.1 N.8 0/420 mA-output channel wireless receiver. Power supply 828 Vdc
DEC305.1 N.8 0/420 mA-output channel wireless receiver. Power supply 24 Vac
DEC305.1 N.8 0/420 mA-output channel wireless receiver. Power supply 24 Vac
DEC305.1 N.8 0/420 mA-output channel wireless receiver. Power supply 24 Vac
DGA311 Wind polar unit display
DGA400 Wind alarm unit with speed indication, for DNA801 sensor
DGA420 Wind alarm unit with speed and direction indication, for DNA821 sensor
DGD010 Relays system for data logger actuation
DGP020 Detector-interventor apparatus for the control of "first rain"
DLA400 Geothermometer Pt100 1/2DIN, cable L. 10 m
DLA401 Stake
DLA402 Connection stroke geothermometer-stake
DLA403 Sun shade for geothermometer
DLA404 Ring for setting the TT150/Pt at different depths
DLA410 Air temperature near the ground level.
DLA411 Sensor support complete with radiant screen
DLE041 Water-proof temperature sensor for measurement inside the soil
DLE041 Air-tight stainless steel probe. Free wires connect. Cable L.10 m
DLE120 Air-tight finned probe for aerothermal measurements. Free wires connect.
DLE124 Plate-made sensor for surface temperature measurement. Free wires
DLE124 Plate probe in silver-coated for contact temperature. Free wires connect.
DLE125 Plate-made sensor for surface temperature measurement. Connector for pyranometers
DLE125 Plate probe in silver-coated for contact temperature. Pyranometer connector
DMA033 Pt100 air temperaure sensor, free wires
DMA033 Air temperature sensors. Free wires connect.
DMA672.1 Temperature and RH% sensor, cable L. 3 m free wires
DMA672.1 Sensitive element (spare part)
DMA672.1 Capacitive thermohygrometer sensor. Cable L=3 m free wires
DMA672.1 Temperaure and relative humidity sensor (spare part)
DMA867 C/RH% sensor, forced ventilation. 4-20 mA output. 10-30 Vac/dc power supply
DMA875 C/RH% sensor , natural ventilation. 4-20 mA output, 10-30 Vac/dc power supply
DMA975 C/RH% sensor natural ventilation. RS485 output (Modbus) 10-30 Vac/dc power
DMA980 C/RH%/hPa sensor natural ventilation. RS485 output (Modbus) 10-30 Vac/dc power
DME730 Air temperature and RH% sensor for materials. Cable L.2 m
DME731 Air temperature and RH% sensor for materials. Support for M-Log included
DME775 Temp.+RH% sensor, power supply 12 Vdc, output 2x0/4-20 mA, 0/1-5 Vdc, 60-300 mV
DME785 Temp.+RH% sensor, power supply 24Vac, output 2x0/4-20 mA, 0/1-5 Vdc, 60-300 mV
DME830 Cordless - Temperature in compost heaps
DME831 Cordless - Temperature and oxygene in compost heaps
DME832 Cordless - Two-dephts temperature probe in compost heaps
DME835 Cordless - Temperature and water-content probe in compost heaps
DME835.1 Electrode (spare part)
DME836 Moisture and temperature sensor for materials. Output 4-20 mA
DME840 Temperature and O2 sensor for materials. Cable L.2 m
DME841 Temperature and O2 sensor for materials. Support for M-Log included
DNA110 Cable L.=10 m. for wind speed sensors (direct signal output)
DNA110 Cable L.=10 m. for wind speed sensors (direct signal output)
DNA121#C Wind speed&direction sensor. Rotor+Vane+Calibration Certificate included
DNA122#C Low power consumption wind speed&direction sensor. Rotor+Vane+Calibration Cert.included
DNA124 Spare part: rotor
DNA125 Cable L.=25 m. for wind speed sensors (direct signal output)
DNA125 Cable L.=25 m. for wind speed sensors (direct signal output)
DNA126 Cable L.=50 m. for for wind speed sensors (direct signal output)
DNA126 Cable L.=50 m. for for wind speed sensors (direct signal output)
DNA127 Spare part: vane
DNA202 Wind speed sensor, direct output with plastic rotor, 4 pins IP65 watertight connector
DNA204 Spare part: rotor
DNA208 Spare part: Plast rotor
DNA212 Wind direction sensor, 0-1 V output with plastic vane, 4 pins IP65 watertight connector
DNA217 Spare part: rotor
DNA218 Spare part: plast vane
DNA301#C Wind speed&direction sensor. Rotor and Calibration Certificate included
DNA302#C Heated wind speed sensor. Rotor and Calibration Certificate included
DNA304#C Low power cons. wind speed sensor. Rotor and Calibration Certificate included
DNA310#C Wind direction sensor direct signal outpout. Vane+calibration Cert. included
DNA311#C Heated wind direction sensor (Encoder) direct signal outpout. Vane+calib.Certificate included
DNA314#C Low power cons. wind direction sensor (Potentiometer) direct signal outpout. Vane+calib.Certificate included
DNA801 Wind speed sensor, 4..20 mA output, power supply 12-24 Vdc/Vac. Rotor included
DNA802 Wind speed sensor, 4..20 mA output, power supply 12-24 Vdc/Vac with heater. Rotor included
DNA805 Wind speed sensor, 0..20 mA output, power supply 12-24 Vdc/Vac. Rotor included
DNA806 Wind speed sensor, 0..20 mA output, power supply 12-24 Vdc/Vac with heater. Rotor included
DNA807 Wind speed sensor, 0-5 Vdc output, power supply 12-24 Vdc/Vac. Rotor included
DNA810 Wind direction, 4..20 mA output, power supply 12-24 Vdc/Vac. Vane included
DNA811 Wind direction, 4..20 mA output, power supply 12-24 Vdc/Vac, with heater. Vane included
DNA814 Wind direction, 0..20 mA output, power supply 12-24 Vdc/Vac. Vane included
DNA815 Wind direction, 0..20 mA output, power supply 12-24 Vdc/Vac, with heater. Vane included
DNA816 Wind direction, 05 Vdc output, power supply 12-24 Vdc/Vac. Vane included
DNA821 Wind speed&direction sensor output 2x4-20 mA, power supply 10-30 Vdc/Vac. Rotor+Vane included
DNA827 Wind speed&direction sensor output 2x0-5Vdc, power supply 10-30 Vdc/Vac. Rotor+Vane included
DNA921 Wind speed&direction sensor RS485 output (Modbus), power supply 10-30 Vdc/Vac. Rotor+Vane included
DNB101 All-in one weather sensor: WS+WD+T+RH+PRESS
DNB104 2 axis sonic anemometer, output RS232, power supply 10-30Vdc
DNB105 2 axis sonic anemometer, output 4-20 mA&RS232, power supply 10-30Vdc
DNB106 2 axis sonic anemometer, output RS232, power supply 10-30Vdc. Heated version
DNB107 2 axis sonic anemometer, output 4-20 mA&RS232, power supply 10-30Vdc. Heated version
DNB146 3 axis sonic anemometer, output 4-20 mA&RS232, power supply 12-30Vdc. Cable L=10m incl.
DNB191 Adapter for DNB104/5/6/7 on meteo pole diam. 50 mm
DNB191 Adapter for DNB104/5/6/7 on meteo pole diam. 50 mm
DNB192 Adapter for DNB146 on meteo pole diam. 50 mm
DND207 Anemometer fan probe. Range 0,5 - 20 m/sec. Free wires
DND209 Anemometer fan probe. Range 0,7 - 40 m/sec. Free wires
DNE501 Hot wire probe, range 0-5/0-20 m/sec. (selectable) Power supply 24 Vac. Selectable output
DNE506 Hot wire anemometer. 0...5-20 m/s range. (selectable) Power supply 12 Vdc. Selectable output
DPA048.1 Monocristalline Reference cell. Shielded cable, L=3m. Supplied with calibration certificate
DPA048.2 Polycristalline Reference cell. Shielded cable, L=3m. Supplied with calibration certificate
DPA048.3 Amorphous Reference cell. Shielded cable, L=3m. Supplied with calibration certificate
DPA053 ISO9060 Second Class pyranometer. uV output
DPA154 ISO9060 First class pyranometer, uV output
DPA240 Thermopile net radiometer, cable 10 m.
DPA245 Shadow band for diffused radiation measurement with pyranometers
DPA252 ISO9060 Secondary standart pyranometer, uV output
DPA257 First class (ISO9060) Pyrheliometer
DPA259 First class (ISO9060) Pyrheliometer - fast response
DPA266 4 components net radiometer
DPA291 Spare part: N.10 plastic domes for net radiometers
DPA293 Spare part: salt catrige
DPA305 Visibility sensor range 20-2000 m output 4-20 mA, power supply 9-30 Vdc
DPA310 Present Weather Sensor Biral SWS-200 - precipitation type, intensity and accumulation outputs (selected WMO 4680 table codes); measurement range < 10 m - 20 km
DPA801 Luxmetric probe CIE 0/100000 lux. Output 0/4-20 mA, power supply 10-30 Vac/Vdc
DPA806 PAR radiometer, range 0..1500 W/m2, 0/4-20mA 0/1-5Vdc output, power supply 10-30Vac/Vdc
DPA817 UV-A radiometer, range 0..70 W/m2, 4-20mA, 1-5Vdc output, power supply 10-30Vac/Vdc
DPA822 UV-B radiometer, range 0..5 W/m2, 0/4-20mA 0/1-5Vdc output, power supply 10-30Vac/Vdc
DPA840 Net radiometer, range-150+1500Wm2, 0/4-20mA 0/1-5Vdc output, power supply 10-30Vac/Vdc
DPA852 ISO9060 Seconday standard pyranometer, 4-20 mA output
DPA854 ISO9060 First class pyranometer, 4-20 mA output, 10-30 Vdc/ac power supply
DPA855 ISO9060 First class pyranometer, 4-20 mA output, 10-30 Vdc power supply
DPA863 ISO9060 Second Class pyranometer. 4-20 mA output, 10-30 Vdc power supply
DPA870 ISO9060 First class pyranometer, RS-485 (Modbus RTU) output, 10-30 Vdc/ac power supply. Input for DLE125 sensor
DPA873 ISO9060 Second Class pyranometer. RS485 (Modbus) output. 10-30 Vdc power supply
DPA952 ISO9060 Seconday standard pyranometer, RS-485 (Modbus RTU) output
DPD504 Sunshine duration meter output 60-300 mV, power supply 12 Vdc
DPE240 Fluxmeter on walls and surface of solids. Free-wire connect
DQA057 C601A Wetness presence sensor, output 100/200 mV, power supply 12 Vdc
DQA060 C401A Rainfall presence sensor, output 100/200 ,mV, power supply 12 Vdc
DQA130.1#C Rain gauge
DQA131.1#C Rain gauge with heater system
DQA135#C Rain gauge
DQA136#C Rain gauge with heater system
DQA223 Thermocompens. barometer (select.output: 0/4-20mA, 0/1-5Vdc, 60-300mV) ps12 Vdc
DQA240.1#C Barometer 800-1100 hPa, 0-1 Vdc/12Vdc. Calibration certificate included
DQA250.1 Barometer, accuracy 0,3 hPa, 0-1 Vdc output, 12 Vdc power supply
DQA340 Sensor for water content and temperature in soil, output 2x0-1 V, Power supply 6-24 Vdc
DQA345 Portable system for water volume and temperature inside materials
DQA445.15 Water Conductivity and temperature sensors. Cable L. 15 m.
DQA445.20 Water Conductivity and temperature sensors. Cable L. 20 m.
DQA445.25 Water Conductivity and temperature sensors. Cable L. 25 m.
DQA445.30 Water Conductivity and temperature sensors. Cable L. 30 m.
DQA445.35 Water Conductivity and temperature sensors. Cable L. 35 m.
DQA445.40 Water Conductivity and temperature sensors. Cable L. 40 m.
DQA445.45 Water Conductivity and temperature sensors. Cable L. 45 m.
DQA445.50 Water Conductivity and temperature sensors. Cable L. 50 m.
DQA445.55 Water Conductivity and temperature sensors. Cable L. 55 m.
DQA445.60 Water Conductivity and temperature sensors. Cable L. 60 m.
DQA453 Water pH sensor.
DQA456.15 Cable for DQA453 L= 15 m
DQA456.20 Cable for DQA453 L= 20 m
DQA456.25 Cable for DQA453 L= 25 m
DQA456.30 Cable for DQA453 L= 30 m
DQA456.35 Cable for DQA453 L= 35 m
DQA456.40 Cable for DQA453 L= 40 m
DQA456.45 Cable for DQA453 L= 45 m
DQA456.50 Cable for DQA453 L= 50 m
DQA456.55 Cable for DQA453 L= 55 m
DQA456.60 Cable for DQA453 L= 60 m
DQA456.65 Cable for DQA453 L= 65 m
DQA458 Converter for DQA445.xx. 2x4-20 mA outputs (Conductivity+Temp). Power supply 24 Vdc
DQA458 Converter for DQA445.xx. 2x4-20 mA outputs (Conductivity+Temp). Power supply 24 Vdc
DQA459 Converter for DQA445.xx. 2x4-20 mA outputs (Conductivity+Temp). Power supply 230 Vac
DQA459 Converter for DQA445.xx. 2x4-20 mA outputs (Conductivity+Temp). Power supply 230 Vac
DQA800 Sensor base for Conductivity, Dissolved Oxygen, Turbidity, pH. ORP, Level sensors
DQA801 Barometer. Select.output: 0/4-20mA, 0/1-5Vdc. 1030 Vdc/ac power supply
DQA804 Slip ring manual cable drum winch
DQA805 External power adapter
DQA806 Portable rechargeable battery pack
DQA807 Calibration cable
DQA820 Water Turbidity sensor
DQA825 Water pH sensor
DQA830 Water ORP sensor
DQA835 Water Level sensor
DQC001.15 Water level sensor. Output 4..20mA/10 m Cable L= 15 M. Power supply 12 Vdc
DQC001.20 Water level sensor. Output 4..20mA/10 m Cable L= 20 m Power supply 12 Vdc
DQC001.25 Water level sensor. Output 4..20mA/10 m Cable L= 25 m. Power supply 12 Vdc
DQC001.30 Water level sensor. Output 4..20mA/10 m Cable L= 30 m. Power supply 12 Vdc
DQC001.35 Water level sensor. Output 4..20mA/10 m Cable L= 35 m. Power supply 12 Vdc
DQC001.40 Water level sensor. Output 4..20mA/10 m Cable L= 40 m. Power supply 12 Vdc
DQC001.45 Water level sensor. Output 4..20mA/10 m Cable L= 45 m. Power supply 12 Vdc
DQC001.50 Water level sensor. Output 4..20mA/10 m Cable L= 50 m. Power supply 12 Vdc
DQC001.55 Water level sensor. Output 4..20mA/10 m Cable L= 55 m. Power supply 12 Vdc
DQC001.60 Water level sensor. Output 4..20mA/10 m Cable L= 60 m. Power supply 12 Vdc
DQC001.65 Water level sensor. Output 4..20mA/10 m Cable L= 65 m. Power supply 12 Vdc
DQC001.70 Water level sensor. Output 4..20mA/10 m Cable L= 70 m. Power supply 12 Vdc
DQC001.80 Water level sensor. Output 4..20mA/10 m Cable L= 80 m. Power supply 12 Vdc
DQC102 Piezometric water level sensor, range 0..200 mm/H2O/4..20 mA/12 Vdc
DQE025 Sensor for differential pressure 025 hPa. 4-20 mA ouput, 11-33 Vdc power supply
DQE521 Sensor for differential pressure 0...3 hPa. 4-20 mA ouput, 11-33 Vdc power supply
DQE522 Sensor for differential pressure 050 hPa. 4-20 mA ouput, 11-33 Vdc power supply
DQE523 Sensor for differential pressure 00,3 hPa. 4-20 mA ouput, 11-33 Vdc power supply
DQE524 Sensor for differential pressure 016 hPa. 4-20 mA ouput, 11-33 Vdc power supply
DQL003 Ultrasonic water level sensor, range 0,25-5 m, output 4-20 mA, power supply 20-36 Vdc
DQL005 Ultrasonic water level sensor, range 0,4-8 m, output 4-20 mA, power supply 20-36 Vdc
DQL006 Ultrasonic water level sensor, range 0,6-15 m, output 4-20 mA, power supply 20-36 Vdc
DQL011 Range 0,25 ... 5 m. output 4..20 mA, power supply 12 Vdc
DQL100 Power supply system 12 Vdc-24 Vdd
DSC101#S ISO9000 type calibration certificate
DSO101#C CO gas conc.probe, range 0..1000 ppm, output 60-300 mV, power supply 12 Vdc. Calib.certificate incl.
DSO102#C CO gas conc.probe, range 0..1000 ppm, output 4-20 mA, power supply 8-15 Vdc. Calib.certificate incl.
DSO104#C NO gas conc.probe, range 0..100 ppm, output 60-300 mV, power supply 12 Vdc. Calib.certificate incl.
DSO105#C NO gas conc.probe, range 0..100 ppm, output 4-20 mA, power supply 8-15 Vdc. Calib.certificate incl.
DSO108#C NO2 gas conc.probe, range 0..20 ppm, output 60-300 mV, power supply 12 Vdc. Calib.certificate incl.
DSO109#C NO2 gas conc.probe, range 0..20 ppm, output 4-20 mA, power supply 8-15 Vdc. Calib.certificate incl.
DSO112#C SO2 gas conc.probe, range 0..20 ppm, output 4-20 mA, power supply 8-15 Vdc. Calib.certificate incl.
DSO115#C NH3 gas conc.probe, range 0..50 ppm, output 60-300 mV, power supply 12 Vdc. Calib.certificate incl.
DSO116#C NH3 gas conc.probe, range 0..50 ppm, output 4-20 mA, power supply 8-15 Vdc. Calib.certificate incl.
DSO119#C H2S gas conc.probe, range 0..50 ppm, output 60-300 mV, power supply 12 Vdc. Calib.certificate incl.
DSO120#C H2S gas conc.probe, range 0..50 ppm, output 4-20 mA, power supply 8-15 Vdc. Calib.certificate incl.
DSO140#C O2 gas conc.probe, range 0..25%, output 60-300 mV, power supply 12 Vdc. Calib.certificate incl.
DSO146#C O3 gas conc.probe, range 0..3 ppm, output 60-300 mV, power supply 12 Vdc. Calib.certificate incl.
DSO150#C Probe for VOCs concentration (0-20 ppm). Calib.certificate incl.
DSO152#C Probe for VOCs concentration (0-2000 ppm). Calib.certificate incl.
DSO204#C CO2 gas conc.probe, range 0..5000 ppm, output 4-20 mA, power supply 10-30 Vac/Vdc. Calib.certificate incl.
DWA410 Cable L.= 10 m. with connector for for sensors DPA863-873-855-870
DWA410 Cable L.= 10 m. with connector for for sensors DPA863-873-855-870
DWA410 Cable L.= 10 m. with connector for for sensors DPA863-873-855-870-817-822
DWA410 Cable L.= 10 m. with connector for for sensors DPA863-873-855-870-817-822
DWA425 Cable L.= 25 m. with connector for sensors DPA863-873-855-870
DWA425 Cable L.= 25 m. with connector for sensors DPA863-873-855-870
DWA425 Cable L.= 25 m. with connector for for sensors DPA863-873-855-870-817-822
DWA425 Cable L.= 25 m. with connector for for sensors DPA863-873-855-870-817-822
DWA426 Cable L.= 50 m. with connector for sensors DPA863-873-855-870
DWA426 Cable L.= 50 m. with connector for sensors DPA863-873-855-870
DWA426 Cable L.= 50 m. with connector for for sensors DPA863-873-855-870-817-822
DWA426 Cable L.= 50 m. with connector for for sensors DPA863-873-855-870-817-822
DWA427 Cable L.= 100 m. with connector for sensors DPA863-873-855-870
DWA427 Cable L.= 100 m. with connector for sensors DPA863-873-855-870
DWA427 Cable L.= 100 m. with connector for for sensors DPA863-873-855-870-817-822
DWA427 Cable L.= 100 m. with connector for for sensors DPA863-873-855-870-817-822
DWA510 Cable L.= 10 m. with connector for analogue output sensors
DWA510 Cable L.= 10 m. with connector for analogue output sensors
DWA510 Cable L.= 10 m. with connector for analogue output sensors
DWA510 Cable L.= 10 m. with connector for analogue output sensors
DWA510 Cable L.= 10 m. with connector for analogue output sensors
DWA510 Cable L.= 10 m. with connector for analogue output sensors
DWA510 Cable L.= 10 m. with connector for analogue output sensors
DWA510 Cable L.= 10 m. with connector for analogue output sensors
DWA510 Cable L.= 10 m. with connector for linearizate output sensors
DWA510 Cable L.= 10 m.
DWA510 Cable L.= 10 m.
DWA510 Cable L.= 10 m.
DWA510 Cable L.= 10 m. with connector for linearizate output sensors
DWA510 Cable L.= 10 m.
DWA510 Cable L.= 10 m.
DWA510 Cable L. 10 m for probes with 6 pin connector
DWA510 Cable L. 10 m for probes with 6 pin connector
DWA510 Cable L. 10 m for probes with 6 pin connector
DWA510 Cable L.= 10 m.
DWA510 Cable L.= 10 m.
DWA510 Cable L.= 10 m.
DWA525 Cable L.= 25 m. with connector for linearizate output sensors
DWA525 Cable L.= 25 m. with connector for analogue output sensors
DWA525 Cable L.= 25 m. with connector for analogue output sensors
DWA525 Cable L.= 25 m. with connector for analogue output sensors
DWA525 Cable L.= 25 m. with connector for analogue output sensors
DWA525 Cable L.= 25 m. with connector for analogue output sensors
DWA525 Cable L.= 25 m. with connector for analogue output sensors
DWA525 Cable L.= 25 m. with connector for analogue output sensors
DWA525 Cable L.= 25 m. with connector for linearizate output sensors
DWA525 Cable L.= 25 m.
DWA525 Cable L.= 25 m.
DWA525 Cable L.= 25 m.
DWA525 Cable L.= 25 m. with connector for linearizate output sensors
DWA525 Cable L.= 25 m.
DWA525 Cable L.= 25 m.
DWA525 Cable L. 25 m for probes with 6 pin connector
DWA525 Cable L. 25 m for probes with 6 pin connector
DWA525 Cable L. 25 m for probes with 6 pin connector
DWA525 Cable L.= 25 m.
DWA525 Cable L.= 25 m.
DWA525 Cable L.= 25 m.
DWA526 Cable L.= 50 m. with connector for analogue output sensors
DWA526 Cable L.= 50 m. with connector for analogue output sensors
DWA526 Cable L.= 50 m. with connector for analogue output sensors
DWA526 Cable L.= 50 m. with connector for analogue output sensors
DWA526 Cable L.= 50 m. with connector for analogue output sensors
DWA526 Cable L.= 50 m. with connector for analogue output sensors
DWA526 Cable L.= 50 m. with connector for analogue output sensors
DWA526 Cable L.= 50 m. with connector for analogue output sensors
DWA526 Cable L.= 50 m. with connector for linearizate output sensors
DWA526 Cable L.= 50 m.
DWA526 Cable L.= 50 m.
DWA526 Cable L.= 50 m.
DWA526 Cable L.= 50 m. with connector for linearizate output sensors
DWA526 Cable L.= 50 m.
DWA526 Cable L.= 50 m.
DWA526 Cable L. 50 m for probes with 6 pin connector
DWA526 Cable L. 50 m for probes with 6 pin connector
DWA526 Cable L. 50 m for probes with 6 pin connector
DWA526 Cable L.= 50 m.
DWA526 Cable L.= 50 m.
DWA526 Cable L.= 50 m.
DWA527 Cable L.= 100 m. with connector for analogue output sensors
DWA527 Cable L.= 100 m. with connector for analogue output sensors
DWA527 Cable L.= 100 m. with connector for analogue output sensors
DWA527 Cable L.= 100 m. with connector for analogue output sensors
DWA527 Cable L.= 100 m. with connector for analogue output sensors
DWA527 Cable L.= 100 m. with connector for analogue output sensors
DWA527 Cable L.= 100 m. with connector for analogue output sensors
DWA527 Cable L.= 100 m. with connector for analogue output sensors
DWA527 Cable L.= 100 m. with connector for linearizate output sensors
DWA527 Cable L.= 100 m.
DWA527 Cable L.= 100 m.
DWA527 Cable L.= 100 m. with connector for linearizate output sensors
DWA527 Cable L.= 100 m.
DWA527 Cable L.= 100 m.
DWA527 Cable L. 100 m for probes with 6 pin connector
DWA527 Cable L. 100 m for probes with 6 pin connector
DWA527 Cable L. 100 m for probes with 6 pin connector
DWA527 Cable L.= 100 m.
DWA601 Serial cable to connect the DEC301-211 to the E/Mlog data logger RS-232 port
DWA601 Serial cable to connect the DEC301-211 to the E/Mlog data logger RS-232 port
DWA601 Serial cable to connect the DEC301-211 to the E/Mlog data logger RS-232 port
DWA801 Submersible cable to connect DQA800 to data logger L.= 10 m
DWA802 Submersible cable to connect DQA800 to data logger L.= 25 m
DWA803 Submersible cable to connect DQA800 to data logger L.= 50 m
DWA804 Submersible cable to connect DQA800 to data logger L.= 100 m
DWA810 Cable for DNB105-107 L= 10 m
DWA811 Cable for DNB100-104-106 L= 10 m
DWA811 Cable for DNB100-104-106 L= 10 m
DYA002 Junction unit between poles 50 mm
DYA004 Lateral support for diam.50 mm pipe
DYA004 Arm for meteo poles 50 mm installation on wall. L. 232 mm
DYA005 Mast H=1m. 50 mm
DYA006.1 Mast H=2m. 50 mm
DYA008.1 Mast H=6m. 50 mm
DYA009.1 Mast H=5 m 50 mm
DYA010.1 Mast H=3 m. 50 mm
DYA011.1 Mast H=4m. 50 mm
DYA013 Tip-up meteo tower H=10 m. plinth installation
DYA013.1 Accessories for DYA013
DYA019 Hinge unit to bring down poles 50 mm (DYA028 and DYA020 are needed)
DYA020 Base for meteo poles 50 mm fitted onto cement plinth
DYA020.1 Set of n.3 anchoring bolt for DYA020 base
DYA020.1 Set of n.3 anchoring bolt for DYA318 base
DYA021 Base for meteo poles 50 mm assembly on ground
DYA022 Base for meteo poles 50 mm assembly on cabin floor
DYA023 Set of n. 3 pickets for DYA021 or DYA021.1 or DYA340
DYA023 Set of n. 3 pickets for DYA028.1
DYA026 Set of n. 3 pickets for DYA028
DYA026 Set of n. 3 pickets for tie rods
DYA026 Set of n. 3 pickets for tie rods
DYA028 Set of n.3 tie-rods and collar for meteo poles (2 to 3 mt)
DYA028 Set of n.3 tie-rods and collar for meteo pole
DYA028.1 Set of n.3 tie-rods and collar for meteo poles (4 to 6 mt)
DYA028.1 Set of n.3 tie-rods and collar for meteo poles (2 to 3 mt)
DYA030 Adjustable tilt support for n. 2 radiometers and DYA049 collar
DYA031 Support for mounting DPA240 to DYA049
DYA032 Horizontal arm for fixing DPA053 to DYA049 collar
DYA034 Horizontal arm for DPA154-252-852-855-970 and DYA049 collar
DYA034 Horizontal arm for fixing DPA007 to DYA049 collar
DYA034 Horizontal arm for fixing DPA009 to DYA049 collar
DYA035 Adjustable tilt support for DPA154-252-852-855-970 and DYA049 collar
DYA035 Tilting arm for fixing DPA154-252-852-855-970 to DYA049 collar
DYA039 Baseplate for rain gauge on the ground
DYA040 Cross-type support for rain gauges to the top of meteo poles 5 cm
DYA041 Horizontal support for Sunshine Duration meter DPD504
DYA043 Set of n.4 pickets for DYA039
DYA043 Set of n.4 pickets for DYA340
DYA043 Set of n.4 pickets for tie-rods fixing
DYA046 Coupling bar for WS+WD sensor on diam. 45-65 mm pole
DYA046 Coupling bar for WS+WD sensor on diam. 45-65 mm pole
DYA046 Coupling bar for WS+WD sensor on diam. 45-65 mm pole
DYA046 Coupling bar for WS+WD sensor on diam. 45-65 mm pole
DYA047 Support for DQL011 on meteo pole 50 mm
DYA048 Leveling fixture DPA053 on DYA035 arm
DYA049 Mast mounting device for diam. 45-65 mm pipe
DYA049 Mast mounting device for diam. 45-65 mm pipe
DYA049 Mast mounting device for diam. 45-65 mm pipe
DYA049 Collar for fixing arms to meteo pole diam. 45-65 mm
DYA049 Collar for fixing arms to meteo pole diam. 45-65 mm
DYA049 Collar for fitting DYA031 to meteo pole 45-65 mm
DYA049 Collar for fixing arms to meteo pole diam. 45-65 mm
DYA049 Collar for fixing arms to meteo pole diam. 45-65 mm
DYA049 Collar for fixing arms to meteo pole diam. 45-65 mm
DYA049 Collar for fixing arms to meteo pole diam. 45-65 mm
DYA049 Mast mounting for 45-65 mm pipe
DYA049 Mast mounting for 45-65 mm pipe
DYA049 Mast mounting for 45-65 mm pipe
DYA049 Collar for fixing sensors on DYA340 tower
DYA049 Mast-mounting device for diam.45-65 mm pipe
DYA057 Brackets for DEC302-3-4-5 on pole (diam. 50 mm)
DYA057 Brackets for DEC302-3-4-5 on pole (diam. 50 mm)
DYA057 Brackets for DEC302-3-4-5 on pole (diam. 50 mm)
DYA058 Lateral support for rain gauge on meteo pole ( it must be added to DYA040)
DYA058 Bar for lateral installation of the DYA091 to diam. 50 mm mast
DYA064 Pole mounting diam. 50 mm for panels DYA206-100-101
DYA072 Wall mounting for IP65 ELF1/2/3xxx boxes
DYA074 Pole mounting diam. 50 mm for IP65 ELF1/2/3xxx boxes 42x65
DYA078 Support for DQA801 with radiant shield. Connection to DYA049 collars.
DYA081 Key lock for ELF1/2/3xxx IP65 boxes
DYA091 Lightning rod with terminal
DYA094 Copper wire for lightning rod diam 50 mm2 L.10 m
DYA098 Discharger peg, 1,5 m.
DYA101 Solar panel 50 W
DYA105 Steel well for insertion of DME836 probe
DYA120 Radiatiation shield
DYA225 Open well for DME7xx sensors
DYA230 Natural ventilation radiant shield
DYA230 Natural ventilation radiant shield
DYA231 Forced ventilation radiand shield, power supply 12 Vdc
DYA231 Forced ventilation radiand shield, power supply 12 Vdc
DYA232 Forced ventilation radiand shield, power supply 24 Vac
DYA232 Forced ventilation radiand shield, power supply 24 Vac
DYA233 Natural ventilation radiant shield. Compatibility with DYA043 arm
DYA233 Natural ventilation radiant shield. Compatibility with DYA043 arm
DYA235 Ventilation radiant screen for ELR200
DYA318 Iron made triangular H.10 m tower. Complete with tie-rods
DYA320 Mobile base for DYA318
DYA323 Set of n. 4 pickets for DYA323 base
DYA340 Trasportable telescopic tower H.4 m.
DYA345 Mounting for diam.50 mm sensors on top of DYA340 tower
DYA448 Pole mounting for DQA458-459 units
DYA448 Pole mounting for DQA458-459 units
DYI010 VEV10 Pan complete with still well
DYI012 Elettrovalve for the automatic water fill-in of the pan by M/R/ELog data loggers
DYI013 Plastic base (alternative to DYI011)
DZC006.S Calibration certificate for Pressure sensors
DZC101.S Calibration certificate. ISO9000 type
DZC101.S Calibration certificate. ISO9000 type
DZC101.S Calibration certificate. ISO9000 type
DZC101.S Calibration certificate. ISO9000 type
DZC101.S Calibration certificate for Temperature sensors
DZC101#C Temperature calibration certificate. ISO9000 type
DZC201.S Calibration certificate for Lux sensors,
DZC202.S Calibration certificate for UV, VIR, PAR radiometers
DZC203.S Calibration certificate for global radiometer
DZC204.S Calibration certificate for net radiometers
DZC301.1 Temperature and RH% calibration certificate. ISO9000 type
DZC301.1 Temperature and RH% calibration certificate. ISO9000 type
DZC301.1 Temperature and RH% calibration certificate. ISO9000 type
DZC301.S Calibration certificate for Temperature and Humidity sensors
DZC301#C Temperature and RH% calibration certificate. ISO9000 type
DZC301#S Temperature and RH% calibration certificate. ISO9000 type
DZC302.S Calibration certificate for Psychrometers
DZC401.S Calibration certificate. ISO9000 type
DZC401.S Calibration certificate. ISO9000 type
DZC401.S Calibration certificate for air speed sensors
DZC403.S Calibration certificate for wind speed sensors
DZC403#S Calibration certificate for wind speed sensors. Included in DNA301-302-304#C
DZC404.S Calibration certificate for wind direction sensors
DZC404#S Calibration certificate for wind direction sensors. Included in DNA310-311-314#C
DZC405.S Calibration certificate for wind speed and direction sensors
DZC405#S Calibration certificate for combined wind speed and direction sensors. Includes in DNA121-122#C
DZC501.S Calibration certificate for gas sensors
DZC501.S Calibration certificate for gas sensors
DZC601.S Calibration certificate for rain gauge
DZC801.S Calibration certificate for BabucM 6 inputs
DZC802.S Calibration certificate for BabucM 4 inputs
DZC803.S Calibration certificate for BabucA
DZC804.S Calibration certificate for BabucABC
DZC805.S Calibration certificate for E-Log
DZZCOL X-Log factory configuration (before delivery)
DZZDAT X-Storage factory configuration
DZZDAT3 LSI LASTEM web application (Price for one station)
DZZSIT6 Calibration certificate. ACCREDIA type
DZZSIT8 RH% calibration certificate ACCREDIA type
DZZSIT8 RH% calibration certificate. ACCREDIA type
DZZSIT8 RH% calibration certificate. ACCREDIA type
ELA100 Serial cable L.15 m
ELA105 Serial cable L.1,8 m
ELA105 Serial cable L.1,8 m to connect DEA504 to PC
ELA105 Serial cable L.1,8 m to connect DEA504 to PC
ELA105 Serial cable L.1,8 m to connect DEA504 to PC
ELA110 Nul modem cable DB9M/DB9M for radio (data logger side)
ELA110 Nul modem cable DB9M/DB9M for radio (data logger side)
ELA110.1 ELog connecting cable for modem DEA718.1
ELA112 R/Mlog connecting cable for modem DEA718
ELA130 Cable to interface Pt100 probe
ELA130 Interface cable for ELR205 radio sensor
ELA200 Rechargeable external additional battery, 2 Ah for E-Log
ELA201 Rechargeable external additional battery, 2 Ah for R/M-Log
ELF020 IP65 box for DGP020 complete with power supply system 220->24Vac
ELF340 50x40 cm. Complete with charger (220/24-12Vdc, 50 W) and 2Ah battery, setup for n.2 Elog
ELF344 50x40 cm. Complete with recharg. battery (2 Ah), charger (220/24-12 Vac/Vdc, 150 W). ELog only
ELF345 50x40 cm. Complete with regulator and 15/40 Ah battery setup (battery NOT included).
ELF346 50x40 cm. Complete with regulator, recharg. battery (18 Ah) , 5W solar panel on the front panel
ELF410 Portable case. Complete with battery holder for n.8 1,5 V battery type D, (batteries NOT included)
ELF412 Portable case. Complete with battery (4 Ah). Charger not included
ELF432 Portable case. Complete with recharg.batt.(15 Ah), charger (220/24-12 Vac/Vdc, 50 W)
ELO007 M-Log, 5 inputs terminal board type, 12 Vdc, fix terminals, 2 MB memory. N.1 RS232, N.1 Ethernet
ELO008 M-Log, 5 inputs terminal board type, 12 Vdc, fix terminal, 2 MB memory. N.2 RS232
ELO009 M-Log, 5 inputs mini-din type, 12 Vdc, mini-din terminal, 2 MB memory. N.2 RS232
ELO105 E-Log, 12 inputs, 12 Vdc, removable terminals, 2 MB memory. N.2 RS232, outputs
ELO305 E-Log, 12 inputs, 12 Vdc, removable terminals, display, 2 MB memory. N.2 RS232, outputs
ELO310 E-Log, 12 inputs, 12 Vdc, remov.terminals&display, 2 MB memory. N.2 RS232, outputs. Batt 1,2 Ah
ELO515M E-Log Master. Built-in radio. 12 Vdc, fix terminal, 2MB memory. N.1 RS232. Batt 1,2 Ah
ELO515R E-Log Repeateer. Built-in radio. 12 Vdc, fix terminal, 2MB memory. N.1 RS232. Batt 1,2 Ah
ELO515S E-Log Slave. Built-in radio. 12 Vdc, fix terminal, 2MB memory. N.1 RS232.
ELR200 R-Log Sensor. Temperature and RH% sensor. 2 MB memory, Lithium 1,2 A battery
ELR205 R-Log Sensor. Radiant temperature sensor. 2 MB memory, Lithium 1,2 A battery. Input for Pt100 sensor
ELR210 R-Log Sensor. Double contact temperature sensor. 2 MB memory, Lithium 1,2 A battery. IP65 case
ELR510M R-Log Master. N.5 inputs mini-din type, 2 MB memory, Lithium 1,2 Ah battery
ELR510R R-Log Repeater. N.5 inputs mini-din type, 2 MB memory, Lithium 1,2 Ah battery
ELR510S R-Log Slave. N.5 inputs mini-din type, 2 MB memory, Lithium 1,2 Ah battery
ELR515M R-Log Master. N.5 inputs clamps type, 2 MB memory, Lithium 1,2 Ah battery
ELR515R R-Log Repeater. N.5 inputs clamps type, 2 MB memory, Lithium 1,2 Ah battery
ELR515S R-Log Slave. N.5 inputs clamps type, 2 MB memory, Lithium 1,2 Ah battery
ELR516M R-Log Master. N.5 inputs clamps type, 2 MB memory, Lithium 1,2 Ah. Ethernet port
ESO101#C Probe for CO concentration (0...1000 ppm). For R/Mlog with Mini/DIN input. Calibration certificate included
ESO104#C Probe for NO concentration (0...100 ppm). For R/Mlog with Mini/DIN input. Calibration certificate included
ESO108#C Probe for NO2 concentration (0...20 ppm). For R/Mlog with Mini/DIN input. Calibration certificate included
ESO111#C Probe for SO2 concentration (0...20 ppm). For R/Mlog with Mini/DIN input. Calibration certificate included
ESO112#C Probe for SO2 concentration (0...20 ppm). output 60-300 mV, power supply 12 Vdc. Calib.certificate incl.
ESO115#C Probe for NH3 concentration (0...50 ppm). For R/Mlog with Mini/DIN input. Calibration certificate included
ESO119#C Probe for H2 concentration (050 ppm).For R/Mlog with Mini/DIN input. Calibration certificate included
ESO140#C Probe for O2 concentration (0 ... 25%). For R/Mlog with Mini/DIN input. Calibration certificate included
ESO146#C Probe for O3 concentration (0 ... 3 ppm). For R/Mlog with Mini/DIN input. Calibration certificate included
ESO150#C Probe for VOCs concentration (0-20 ppm). For R/Mlog with Mini/DIN input. Calibration certificate included
ESO152#C Probe for VOCs concentration (0-2000 ppm).For R/Mlog with Mini/DIN input. Calibration certificate included
ESO203#C Probe for CO2 concentration (05000 ppm). For R/Mlog with Mini/DIN input. Calibration certificate included
ESP021 Sensor for differential pressure 0...3 hPa. Mini-din connect
ESP022 Sensor for differential pressure 050 hPa. Mini-din connect
ESP023 Sensor for differential pressure 00,3 hPa. Mini-din connect
ESP024 Sensor for differential pressure 016 hPa. Mini-din connect
ESP025 Sensor for differential pressure 025 hPa. Mini-din connect
ESR000#C Luxmetric probe CIE 0/5000 lux. . Mini-din connect. Certificate included
ESR001#C Luxmetric probe CIE 0/25000 lux.. Mini-din connect. Certificate included
ESR003#C Luxmetric probe CIE 0/100000 lux indoor/outdoor uses. Mini-din connect. Certificate included
ESR231 Net radiometer (ISO7730 standard). Mini-din connect
ESR240 Fluxmeter on walls and surface of solids. Mini-din connect
EST033 Pt100 air temperaure sensor, Mini-Din connector
EST033 Air temperature sensors. Mini-Din connector
EST105 Air-tight finned probe for aerothermal measurements. Mini-din connect.
EST122 Air-tight stainless steel probe. Mini-din connect.
EST124 Plate-made sensor for surface temperature measurement. Mini-Din connector
EST124 Plate probe in silver-coated for contact temperature. Mini-din connect.
EST130 Floor surface/H.20 air temperatures probe (ISO7730 standard).
EST131 Globothermometric probe (ISO7726 standard).
ESU102 Portable psychrometric forced-ventilation probe, 2xPt100. Mini-din connect.
ESU121 Wet bulb temperatura probe natural ventilation
ESU403.1 Temperature and RH% sensor, cable L. 3 m Mini-DIN connector
ESU403.1 Capacitive thermohygrometer sensor. Cable L.1 m. Mini-din connect
ESV106#C Hot wire anemometric for air turbolences (ISO7730). Mini-din connect. Calib.certificate included
ESV107 Hot wire anemometric probe, one output. Mini-din connect.
ESV202 Thermo-Anemometer fan probe diam. 11 cm. Range 0,2 - 20 m/sec. Mini-din connect
ESV207 Anemometer fan probe. Range 0,5 - 20 m/sec. Mini-din connect
ESV209 Anemometer fan probe. Range 0,7 - 40 m/sec. Mini-din connect
ESV306#C Hot wire anemometric for air turbolences (ISO7730). RS232 output for M-Log (COM2). Calib.certificate included
ESV307 Hot wire anemometric probe, one output. RS232 output for M-Log (COM2).
EZB311.1 Radio communicator, RS232 output, Lithium 1,2Ah battery, 12 Vdc power supply
EZB311.1 Communicator for radio signal reception on PC. RS232 output
EZB311.1 Communicator for radio signal reception on PC. RS232 output
EZB311.1 Communicator for radio signal reception on PC. RS232 output
EZB312.1 Radio communicator, RJ45 connector for Ethernet connection, Lithium 1,2 Ah battery, 12 Vdc power supply
EZB312.1 Communicator for radio signal reception on PC. Ethernet RJ45 output
EZB312.1 Communicator for radio signal reception on PC. Ethernet RJ45 output
EZB312.1 Communicator for radio signal reception on PC. Ethernet RJ45 output
EZB321.1 Radio signal repeater, Lithium 1,2A battery, 12 Vdc power supply
EZB321.1 Radio signal repeater
EZB321.1 Radio signal repeater
EZB321.1 Radio signal repeater
KME101 Including: ELO105 data logger, WS+WD+T+RH+PRESS. sensors and accessories
KME102 Including: ELO105 data logger, WS+WD+T+RH+PRESS.+RAIN sensors and accessories
KME103 Including: ELO105 data logger, WS+WD+T+RH+PRESS.+RAIN+RAD. sensors and accessories
MC1040 Spare part: Screew for fixing DNA208 rotor
MC1040 Spare part: screew to fix the rotor
MC4101 Support for DEA718/718.1 in ELF3XXX boxes
MC4322 Arm for fixing DEC301 or DEC402 to DYA049 collar for pole installation
MC4322 Arm for fixing DEC301 or DEC402 to DYA049 collar for pole installation
MC4322 Arm for fixing DEC301 or DEC402 to DYA049 collar for pole installation
MC5007 Spare part: reed relay for DQA130-131
MG0558 Pb15Ah battery for mounting inside ELF345 box
MG2251 7 pin free male connector
MG2251 7 pin free male connector
MG2251 7 pin free male connector
MG2251 7 pin free female connector
MG2251 Female free connector 7C without cable
MG2251 7 pin free female connector
MG2251 Free water-proof female connector for DWA5xx cable
MG2251 7 pin female connector for DWA5xx
MG2251 7 pin free femal connector
MG2251 7 pin free femal connector
MG2252 7 pin free male connector for DNA1xx cable
MG2252 7 pin free male connector for DNA1xx
MG2257 Free water-proof female connector, 4 c
MG2257 Spare part: free water-proof female connector, 4 c
MG2272 Free Female Connector for DNB10x
MG2272 Free Female Connector for DNB10x
MGO560 Pb40Ah battery for mounting inside ELF345 box
ML3021 Spare part: T+RH% sensitive element head
ML3391 Oxygen cell. Spare part
ML3391 Oxygen cell. Spare part
ML501 Potentiometer for DNA122
ML657 Optoelectronic system for DNA122
ML659 Optoelectronic system for DNA121-821-827
MM2001 Spare part: Bearings
MM2001 Spare part: bearings
MM2011 Spare part: bearings for Wind direction (qt.2 required)
MM2020 Spare part: bearings for Wind speed (qt.2 required)
MM2025 Spare part: bearing
MM2025 Spare part: bearings
MM3101 Spare cotton sock
MM3103 Spare cotton sock
MM7500 Tube of thermal conductive paste
MM7500 Thermo conductive paste
MN1025 Cable for DLE120 (price each meter)
MN1071 Cable for DNA202 (Price each meter)
MN1071 Cable for DNA212 (Price each meter)
MN1071 Cable (each meter)
MN1072 Cable each meter
MN1510 Cable 4x2xAWG24/I-S/FTP-CMX Cat.5 for DEA507-DEA508 connection (PRICE EACH M.)
XLA001 N. 16 inputs analogue extension module (24 bit)
XLA003 RS-232 interface for analogue sensors (Pt100, 420 mA, 02 Vdc) ad n.1 input
XLA004 RS485/USB interface to connect RS485 bus devices to USB port
XLA005 USB/No. 2 RS232 INTERFACE FOR XLO001
XLA009 Interface for n.2 free wires sensors. Electrical protection and Mini-DIN connectors to X-Log inputs
XLA010 L. 50 cm cable interface with Mini-DIN connector
XLA015 Interface for n.5 free wires sensors. Electrical protection and Mini-DIN connectors to X-Log inputs
XLA017 Interface for n.8 free wires sensors. Electrical protection and Mini-DIN connectors to X-Log inputs
XLF226 IP65 enclosure, It includes 4 W solar panel fixed on it front panel.
XLF340 IP65 box 500x400 mm. Includes 230VAC/24-13,8 V (50W) power pack, 2Ah battery and fitting for X-Log and accessories
XLF345 IP65 enclosure, with setup for rechargeable batteries, connectable to solar panel
XLF346 IP65 enclosure for XLA001 extension inputs module
XLF432 Portable IP65 enclosure, 18 Ah rechargeable battery and power battery charger. Power supply 110-230 Vac / 13.8 Vdc.
XLO001 X-Log 12 inputs, 32 MB memory, 12 Vdc power supply. Complete with USB pen driver and X-Com program.

Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.

Back To Last Page

LSI LASTEM

Portable "All-in-One" Instruments

Heat Shield Portable Wireless WBGT Meter

Data Loggers

E-Log Environmental Data Logger
M-Log Mini Data Logger
R-Log Radio Data Logger

Software

3DOM Software
CommNET-EG
GidasADM Odour Dispersion Program
InfoFLUX
Penman Evapotranspiration
Synop
TEA (Thermal Environments Application)
WEB-Application
XPanel

Sensors

"All-in One" Weather Sensor
Automatic Evaporimeter
Barometric Pressure Sensors
Compact Anemometer
Compact Wind Vane
Masts For Sensors And Data Logger Installation
Pyranometers
Rain Gauge
Snow Level Sensor
Soil Temperature Sensors
Standard Anemometers (Direct Output)
Temperature And Relative Humidity Inside Materials
Thermohygrometers (Direct Input & Analogue)
Ultrasonic Anemometer (Digital Output)
Visibility Sensor
Water Level Sensors
Wind Vanes

Indicators and Signals Conditioning Units

CAO Display Units

Part Number Index

Part Number Index

Want A Quotation?

Please fill out the following fields and we will e-mail you a quotation shortly.

Keison International Ltd. trading as:
Keison Products, VoIPon Solutions & 4Gon
keison VoIPon Solutions 4Gon