Home › Environmental › Parameter Measurement › LSI LASTEM Standard Anemometers (Direct Output)
LSI LASTEM Standard Anemometers (Direct Output)
The LSI LASTEM Standard Anemometer is a wind speed sensor with direct signal output (Hz/m/s).
When there is an application requirement for low thresholds and good accuracy, even at a very low wind speed. the LSI LASTEM Standard Anemometer is suitable.
Very high resolution is ensured with a tachometer being the wind speed element is a tachometer (with 32 steps).
The DNA302#C model features a heater and the DNA304#C features extremely low power consumption, making it suitable for applications with a very low energy availability.
DYA046 Coupling bar for WS+WD sensors on ø 45
÷65 mm pole
DZC405 Calibration certificate. Included in
DNA110 Cable for DNA30x#C. L = 10 m
DNA125 Cable for DNA30x#C. L = 25 m
DNA126 Cable for DNA30x#C. L = 50 m
DWA510 Cable for DNA80x L = 10 m
DWA525 Cable for DNA80x L = 25 m
DWA526 Cable for DNA80x L = 50 m
DWA527 Cable for DNA80x L = 100 m
MM2251 Free connector without cable
DNA204 Spare part: rotor
MM2025 Spare part: bearing
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page