Home › Laboratory › Heating & Control › Bibby Scientific HC1 Heating Cords
UP TO 450°C GLASS CORD INSULATION
Models in this range include HC101, HC102, HC103, HC104, HC105 and HC106.
Bibby Scientific HC1 Heating Cords
Surface Loading: 4W per metre2 (26W per inch2).
Linear Loading: 195 W per cm (60 W per foot).
Voltages: 115 or 230 volts.
Construction: The heater consists of a nickel/chromeheating
element wound on an inorganic core and has
122 cm. Insulated unheated flexible lead at each end of
the heating section. The whole, including the unheated
leads, are covered with a tough external sheath of
braided glass fibre.
Applications: The versatility of this heater can be
judged from the fact that the 61 cm (24in) length
(HC102) when closed coiled round 25mm (1in) tubing
gives a wattage concentration of 4 W/cm2 (26 W/in2).
Alternatively, it can be traced or spiralled round the
tubing at any predetermined open pitch to give the
required energy input. Where processes require
observation, this heater, used in conjunction with
transparent tubing, will provide the ideal solution.
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.